www.ti.com

ADS1248EVM-PDK Kit Operation

The program currently runs only on Microsoft Windows platforms of Windows XP; Windows Vista is NOT

supported.

If this is the first time installing ADCPro and plug-ins, follow these procedures to run ADCPro and perform

any necessary firmware installations. Make sure the ADCPro software and device plug-in software are

installed from the CD-ROM as described in Section 8.1, Installing the ADCPro Software.

Step 1. Start the software by selecting ADCPro from the Windows Start menu. The screen in Figure 9

appears.

Figure 9. ADCPro Software Start-up Display Window

SBAU142B– April 2009–Revised May 2011 ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK

Submit Documentation Feedback

ADS1248EVM-PDK Kit Operation

www.ti.com

break

Step 2. Select ADS1248EVM from the EVM drop-down menu. The ADS1248EVM-PDK plug-in

appears in the left pane, as shown in Figure 10.

Figure 10. ADS1248EVM-PDK Plug-In Display Window

Step 3. The ADS1248EVM-PDK plug-in window has a status area at the top of the screen. When the

plug-in is first loaded, the plug-in searches for the board. You will see a series of messages

in the status area indicating this action.

ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK SBAU142B– April 2009–Revised May 2011

Submit Documentation Feedback

www.ti.com

ADS1248EVM-PDK Kit Operation

break

Step 4. If the plug-in cannot connect to the EVM, you will see a window as shown in Figure 11. This

message may indicate that the firmware is not loaded on the MMB3. You may select Retry

Auto Connect; if that action fails, select Retry Manual Connect and specify the COM port to

be used.

Figure 11. Connection Timeout

Step 5. The plug-in detects whether or not the board has the correct firmware loaded. The first time

you use the ADS1248EVM-PDK, the firmware for the MMB3 may need to be downloaded to

the MMB3. If the firmware needs to be loaded, you will see a screen as shown in Figure 12.

Figure 12. Firmware Download Message Box

SBAU142B– April 2009–Revised May 2011 ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK

Submit Documentation Feedback

Part #	ERJ-3EKF2001V
Description	RES THKFLM 0603 2K OHM 1% 1/10W 100PPM/ C SMD - Cut TR (SO
Category	RESISTOR
Availability	Out of Stock
Qty	0

ERJ-3EKF2001V

Technical Document