DS14185
SNLS093C –APRIL 1999–REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Supply Voltage (V
CC
) +7V
Supply Voltage (V
+
) +15V
Supply Voltage (V
−
) −15V
Driver Input Voltage 0V to V
CC
Driver Output
(3)
Voltage (Power Off) ±15V
Receiver Input Voltage ±25V
Receiver Output Voltage (R
OUT
) 0V to V
CC
Maximum Package Power Dissipation @ DW Package
+25°C 1488 mW
Derate DW Package 11.9 mW/°C above +25°C
Storage Temperature Range −65°C to +150°C
Lead Temperature Range (Soldering, 4 seconds) +260°C
ESD Ratings (HBM, 1.5 kΩ, 100 pF) ≥1.5 kV
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. The table of Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Only one driver output shorted at a time.
Recommended Operating Conditions
Min Typ Max Units
Supply Voltage (V
CC
) +4.75 +5.0 +5.25 V
Supply Voltage (V
+
) +9.0 +12.0 +13.2 V
Supply Voltage (V
−
) −13.2 −12.0 −9.0 V
Operating Free Air Temperature (T
A
) 0 25 70 °C
Electrical Characteristics
(1)
Over recommended supply voltage and operating temperature ranges, unless otherwise specified.
Symbol Parameter Conditions Min Typ
(2)
Max Units
DEVICE CHARACTERISTICS
I
CC
V
CC
Supply Current No Load, All Inputs at +5V 21.0 30 mA
I
+
V
+
Supply Current
(1)
No Load, All Driver V
+
= 9V, V
−
= −9V 8.7 15 mA
Inputs at 0.8V or +2V
V
+
= 13.2V, V
−
= −13.2V 13 22 mA
All Receiver Inputs
I
−
V
−
Supply Current
(1)
V
+
= 9V, V
−
= −9V −12.5 −22 mA
at 0.8V or 2.4V.
V
+
= 13.2V, V
−
= −13.2V −16.5 −28 mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified. For current, minimum and maximum values are specified as an absolute value and the sign is used to
indicate direction. For voltage logic levels, the more positive value is designated as maximum. For example, if −6V is a maximum, the
typical value (−6.8V) is more negative.
(2) All typicals are given for: V
CC
= +5.0V, V
+
= +12.0V, V
−
= −12V, T
A
= +25°C.
2 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: DS14185
