TOOLS & ACCESSORIES

Powered Cable Stripper

This powerful, low-cost, portable hand-held (less than 2.25 lbs)

cable stripper delivers, production quality performance, and

gives you up to 250 strips per charge (7.2 V Ni-cad battery without

memory effect). The replaceable, 3-level cutter head, is preset to

strip your coax cable for Trompeter’s 220 Series, Tool Crimp BNC

connectors. The cutter head has adjustable depth cutter blades

for precision tuning. Precision ground, tool steel blades (hardens

to Rockwell 64) give you up to 15,000 strips! Rapid Charger/

Reconditioner recharges your Ni-Cad in only 1.5 hours! Fast

charge: 1.5 hrs/Recondition in 3.1 hrs.

Powered Cable Stripper Kits (1-year Warranty)

Includes: 1 Driver, 1 Ni-Cad Battery Pack, 1 Cutter Head, 1 Rapid

Charger/Reconditioner Station, and 1 Carrying Case.

Cable Type Stripper/Cutter head

For RG-59

BCS/C24T3D

For 8281

BCS/C24T3U

Important Note: The 3-level cutter heads included in the kits are set

to the same stripping dimensions as our STC-F (see below) stripping

cassette for Trompeter “Tool Crimp” BNC cable connectors.

Use 2-level cutter heads for Trompeter “Wrench Crimp” BNC

cable connectors.

Additional Accessories

Extra Cutter heads

See guide above

DC Driver Battery: Requires cutter head from above

BCS

AC Driver and AC Base Unit: Requires cutter head from above

ACS

Rapid Charger/Reconditioner

BRCC

Ni-Cad Battery Pack

ABP-NSA

AC Power Converter

ACC-NSA

ManualCableStrippingTools

Cable Cutting Tool

Designed to cut Coax cable without compressing dielectric or

damaging center conductor.

Cutting Tool

700-0024

Manual Cable Stripping Tool

Tool (only) - Requires blade cassette listed

ST1

Cassette (For Tool Crimp BNC Connectors)

STC- F

Cassette (For Wrench Crimp BNC Connectors)

STC- W

Cutter Head Guide

TROMPETER ELECTRONICS INC.

1.3

3.525

1.175

STC-F

LT GREEN

STC-W

GRAY

.156

.625

.108

.625

.330

1.405

Cable Strippers

Tools & Accessories

Cable Outside Diameter 2-Blade Cut 3-Blade Cut D-Ring#

.070-.110 C24T2A C24T3A -D7

.160-.215 C24T2B C24T3B -D8

.190-.230 C24T2C C24T3C -D9

.235-.270 C24T2D C24T3D -DD8

.300-.430 C24T2E C24T3E

.110-.160 C24T2I C24T3I

.271-.305 C24T2U C24T3U

TOOLS & ACCESSORIES

Additional Accessories

Extra Cutter heads

See guide above

DC Driver Battery: Requires cutter head from above

BCS

AC Driver and AC Base Unit: Requires cutter head from above

ACS

Rapid Charger/Reconditioner

BRCC

Ni-Cad Battery Pack

ABP-NSA

AC Power Converter

ACC-NSA

8-Point Crimp Tool

75Ω Center Contact Pin (Handle Color)

BNC/Pl11 Patch Plugs (Red/Blue)................................... 010-0097

BNC Jack and plug (Blue)............................................... 010-0088

12-Point Crimp Tool

75Ω Center Contact Pin (Handle color)

BNC/TNC/Pl11 Patch Plug

(Green/yellow).............................................................. 010-0098

* Note: Dies imprint either cavity (A/B) or hex size onto crimp sleeve. Custom dies are available for special imprints.

For Standard and Miniature Twinax/Triax patching: 70 Series: TRB/TRT,

150 Series: TRS/TTM, 450 Series: 2-lug/3-lug/threaded connectors.

Crimp Tool

Die not included, for crimp dies see below

For crimp dies not listed, call customer service.

A Closure

B Closure

C Crimp

D Crimp

.175 DIA

2PL

.697

Max

1.260

.50

.236

CD3-1

.344 HEX CRIMP

.263 SHEILD CRIMP

CD5-8

(1.000)

CD5-8 SHOWN

.527

Crimp Tools

For crimp dies not listed or for special embossing, call customer service.

Tools & Accessories

Outer Sleeve A Embosses B Embosses

CD3-1 .213 1A .178 1B

CD3-19 .178 178 .255 255

Frame CT 5

Outer Sleeve A Embosses B Embosses

CD3-1 .213 1A .178 1B

CD3-2 .324 2A .255 2B

CD3-3 .344 3A .290 3B

CD3-5 - - .197 5B

CD3-19 - -

CD3-21 .290 290 .255 255

CD3-22 .404 404 .068 -

Twinax/Triax Crimp Tool

For Bushing/Shield

Crimp Tool Only....................................................... M22520/5-01

Crimp Tool with Die..................................... M22520/5-01/CD5-#

Connector Series Cable Type Cable Group # Bushing/Shield Crimp Die Center Contact Crimp Tool Part # Center Contact Positioner Part #

70C Twinax 201-225 CD5-8 M22520/1-01 010-0044 Pin (TP837)

010-0045 Socket (TP838)

PLR70C

PLR155AC

Triax 301-309 CD5-10

Small Body 150AC Twinax 201-206, 208, 209, 217-223 CD5-9 M22520/2-01 010-0041

Triax 301-304, 309 CD5-11

Large Body 150AC Twinax 207, 210, 211-216, 224-225 CD5-8 M22520/2-01 010-0043

Triax 305-306, 308 CD5-13

Triax 307 CD5-10 M22520/1-01 010-0044 Pin (TP837)

010-0045 Socket (TP838)

PL75MC Twinax 201-225 CD5-14 M22520/2-01 010-0096

226 CD5-15 M22520/2-01 010-0096

450AC Twinax 201-206, 208, 209, 212, 217-223 CD5-9 M22520/2-01 010-0041

PLR450 Twinax 201-206, 208, 209, 212, 217-223 CD5-120 M22520/2-01 010-0041

SPC8P Twinax 201-205, 217, 218, 221, 222 CD5-4 M22520/2-01 Daniels K709

SPC8S Triax 301-303 CD5-7

TOOLS & ACCESSORIES

Twinax/Triax Cable Assembly Tester

The Twinax/Triax Cable Assembly Tester is designed to test for

opens, shorts, and cross wired connectors. The tester comes

complete with terminators and testing instructions. This tool is

designed to provide quick verication of TRB cable assemblies in

the palm of your hands. The compact hand held unit measures

2 3/4" x 4 1/2" and provides versatility for testing connectors in

the eld. The unit comes in a soft zipper case which includes a

9v battery and terminators for standard TRB plugs. It can also be

used for other connector families with an adapter, or short jumper

cable when used with the proper termination.

• 3 Conductors which test for opens, shorts, and cross connects

• Concentric TRB Interface, which tests both Twinax and Triax

• Pass/Open/Short LED indicators

• Easy to follow testing instructions

• Complete with terminators, carrying case, and a 9V battery

Designed to test for the proper assembly of BNC plugs with coax

cables. Tests for center contact pin height and continuity (short

or open). The new BNC tester is the same size as the twinax/triax

tester but exclusively tests only BNC plugs. Mini-WECo continuity

test adapter now available (sold separately).

• Compact design

• Pass/Open/Short LED indicators

• One test required for testing remote cable runs

• Easy to follow instructions

• Complete with terminators, case, and 9V battery

• On/Off switch

Cable Assembly Testers

Tools & Accessories

BNC Coax Tester

Twinax/Triax Cable Assembly Connector Test Set

010-0123-1

Coax Cable Assembly Connector Test Set

75Ω BNC Plug................................................................. 010-0133

75Ω MBNC Plug.............................................................. 010-0208

Mini-WECo Adapter (Continuity Only)

Sold Separately

105-1885

Part #	CJ70-47
Description	CONN TRB JACK STR CRIMP
Category	Microcircuit
Availability	Out of Stock
Qty	0

CJ70-47

Related Items

Technical Document