2
®
OPA132, 2132, 4132
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
SPECIFICATIONS
At T
A
= +25°C, V
S
= ±15V, unless otherwise noted.
OPA132P, U
OPA2132P, U
OPA132PA, UA
OPA2132PA, UA
OPA4132PA, UA
PARAMETER CONDITION MIN TYP MAX MIN TYP MAX UNITS
OFFSET VOLTAGE
Input Offset Voltage ±0.25 ±0.5 ±0.5 ±2mV
vs Temperature
(1)
Operating Temperature Range ±2 ±10 * * µV/°C
vs Power Supply V
S
= ±2.5V to ±18V 5 15 * 30 µV/V
Channel Separation (dual and quad) R
L
= 2kΩ 0.2 * µV/V
INPUT BIAS CURRENT
Input Bias Current
(2)
V
CM
= 0V +5 ±50 * * pA
vs Temperature See Typical Curve *
Input Offset Current
(2)
V
CM
= 0V ±2 ±50 * * pA
NOISE
Input Voltage Noise
Noise Density, f = 10Hz 23 * nV/√Hz
f = 100Hz 10 * nV/√Hz
f = 1kHz 8 * nV/√Hz
f = 10kHz 8 * nV/√Hz
Current Noise Density, f = 1kHz 3 * fA/√Hz
INPUT VOLTAGE RANGE
Common-Mode Voltage Range (V–)+2.5 ±13 (V+)–2.5 * * * V
Common-Mode Rejection V
CM
= –12.5V to +12.5V 96 100 86 94 dB
INPUT IMPEDANCE
Differential 10
13
|| 2 * Ω || pF
Common-Mode V
CM
= –12.5V to +12.5V 10
13
|| 6 * Ω || pF
OPEN-LOOP GAIN
Open-Loop Voltage Gain R
L
= 10kΩ, V
O
= –14.5V to +13.8V 110 120 104 * dB
R
L
= 2kΩ, V
O
= –13.8V to +13.5V 110 126 104 120 dB
R
L
= 600Ω, V
O
= –12.8V to +12.5V 110 130 104 120 dB
FREQUENCY RESPONSE
Gain-Bandwidth Product 8 * MHz
Slew Rate ±20 * V/µs
Settling Time: 0.1% G = –1, 10V Step, C
L
= 100pF 0.7 * µs
0.01% G = –1, 10V Step, C
L
= 100pF 1 * µs
Overload Recovery Time G = ±1 0.5 * µs
Total Harmonic Distortion + Noise 1kHz, G = 1, V
O
= 3.5Vrms
R
L
= 2kΩ 0.00008 * %
R
L
= 600Ω 0.00009 * %
OUTPUT
Voltage Output, Positive R
L
= 10kΩ (V+)–1.2 (V+)–0.9 * * V
Negative (V–)+0.5 (V–)+0.3 * * V
Positive R
L
= 2kΩ (V+)–1.5 (V+)–1.2 * * V
Negative (V–)+1.2 (V–)+0.9 * * V
Positive R
L
= 600Ω (V+)–2.5 (V+)–2.0 * * V
Negative (V–)+2.2 (V–)+1.9 * * V
Short-Circuit Current ±40 * mA
Capacitive Load Drive (Stable Operation) See Typical Curve *
POWER SUPPLY
Specified Operating Voltage ±15 * V
Operating Voltage Range ±2.5 ±18 * * V
Quiescent Current (per amplifier) I
O
= 0 ±4 ±4.8 * * mA
TEMPERATURE RANGE
Operating Range –40 +85 * * °C
Storage –40 +125 * * °C
Thermal Resistance,
θ
JA
8-Pin DIP 100 * °C/W
SO-8 Surface-Mount 150 * °C/W
14-Pin DIP 80 * °C/W
SO-14 Surface-Mount 110 * °C/W
*Specifications same as OPA132P, OPA132U.
NOTES: (1) Guaranteed by wafer test. (2) High-speed test at T
J
= 25°C.