1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
WASHERS
One standard screwdriver type adjustable lug is sup-
plied with each unit.
Two types of lugs can be ordered separately: stan-
dard or with a silver contact button; both types are
available with a screwdriver type lug.
Double thumb screw Lug (Part Number 2160E)
The double thumb screw adjustable lug permits
easier adjustment and less chance of damage to
resistance wire. Available for 1.125" cores only.
Metal Centering
Diameter For max. For resistors
Part No. Outer Inner screw size (power ratings)
6000E 0.563" 0.313 #10 25, 50, 75 watt
6001E 0.75" 0.5 #10 100 watt
6003E 1.125" 0.75 0.25" 175, 225 watt
Mica insulating
Diameter For resistors
Part No. Outer Inner (power ratings)
6010E 0.75" 0.625" 25, 50, 75 watt
6011E* 0.75" 0.313" 25, 50, 75 watt
6012E 1" 0.625" 100 watt
6013E* 1" 0.5" 100 watt
6014E 1.25" 0.625" core 1" O.D. x 0.625" I.D.
6015E* 1.25" 0.625" core 1" O.D. x 0.625" I.D.
6016E 1.5" 0.625" 175, 225 watt
6017E* 1.5" 0.75" 175, 225 watt
* Use with centering washers.
Resistor core diam. Standard part numbers
(O.D., in. / mm) Standard Silver
0.313 / 7.94 2115E 2116E
0.563 / 14.3 2121E 2123E
0.750 / 19.05 2125E 2127E
1.125 / 28.58 2133E 2135E
Tubular
resisTor
MounTing
MounTing
Hardware
Mounting Hardware
For 200, 210, 270 and 280 Series
= Most popular Standard values
= Standard values
= Non-Standard values subject to minimum handling charge per item
ADJUSTABLE LUGS
FOR 210 SERIES
Thru-Bolts, with centering washers and mica insulat-
ing washers, permit perpendicular mounting of 200,
210 and 270 type resistors to panels up to 0.25"
thick.
Bolt size For resistors
Part No. Length No. (power rating)
7PA5E 1.75" 8 8 watt
7PA10E 2.5" 8 12 watt
7PA20E 2.75" 8 20 watt
7PA25E 2.75" 10 25 watt
7PA50E 4.75" 10 50 watt
7PA75E 6.75" 10 75 watt
7PA100E 7.313" 10 100 watt
7PA160E 9.5" 0.25" 175 watt
7PA200E 11.5" 0.25" 225 watt
Brackets fit inside cores of 200, 210 and 270 type
resistors and remain in place by spring tension.
Standard brackets are plated steel and have no suffix
to part number. Spring steel brackets are indicated
with an “S” suffix following part number.
Part number Mtg screw For resistors
Standard Spring steel size (max.) (power ratings)
5E 5SE 6 8, 12 watt
7E 7SE 6 20 watt
9E 9SE 6 25, 50, 75 watt
12E 12SE 10 100 watt
18E 18SE 10 175, 225 watt
MOUNTING BRACKETS THRU BOLTS
More detailed information at http://www.ohmite.com/techdata/lug-mounting.php
