RFI Power Line Filters for Switching Power Supply Noise Suppression
The EP/VP series of RFI filters has been developed to
reduce conducted noise to acceptable limits for
equipment that must comply with the requirements
of CISPR in Europe and the FCC specifications in the USA.
These filters provide high insertion loss for both line-
to-ground and line-to-line emissions throughout the
frequency range. They are particularly well suited
for equipment to better meet both stringent emissions
specifications (such as CISPR 22, A-level and FCC
Part 15J, Class B) and the EP models meet very low
leakage current requirements.
Tyco Electronics Corcom Products has extended the EP
Series of Power Line Filters by adding a 7 Amp and 12
Amp versions to the existing 3, 6, 10, and 20 Amp product
offering. The new filters offer higher performance in a
smaller package at a lower price than the existing 6 Amp
and 10 Amp versions. The smaller package size and
comparable performance is a better match to Schaffner's
FN 2070 Series. The new filters are RoHS compliant.
Specifications
Maximum leakage current,each line-to-ground
VP
Models EP Models
@ 120 VAC 60 Hz: .73mA .21mA
@ 250 VAC 50 Hz: 1.27mA .36mA
Hipot rating (one minute):
line-to-ground 2250 VDC
line-to-line 1450 VDC
Operating frequency: 50/60 Hz
Rated voltage (max.): 250 VAC
Rated current:
03EP 3A 10EP 10A
06EP 6A 12EP 12A
7EP 7A 20EP/VP 20A
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current Frequency–MHz
Rating .01 .05 .15 .5 1 5 10 30
EP
3A 1 10 58 65 65 66 60 25
6A,10A 1
10 58 65 65 66 60 25
7A 15 28 63 75 78 75 75 55
12A 12
7
52
68 70 70 70 45
20A 3 6 28 50 55 60 55 55
VP
20A 3 2 42 60 65 65 55 55
Line-to-line in 50 ohm circuit
Current Frequency–MHz
Rating .01
.15 .5 1 5 10 20 30
EP
3A 1
36
65 65 65 65 58 58
6A,10A 1 30 65 65 65 65 35 35
7A 10 43 55 65 68 70 65 50
12A 11 7 13 70 70 70 65 45
20A
8 25 60 65 65 58 58 58
VP
20A
8
25 60 65 65 58 58 58
56
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com
Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com
specified. Values in italics
Specifications subject
Germany: 49-89-6089-0
are metric equivalents. to change.
EP/VP Series
EP/VP Series
CORCOM Product Guide
Electrical Schematic
Resistor location for reference only.
E
P1/VP1
EP7/VP7
E
P3/VP3
Recommended Panel Cutout
A
Tapped insert:
D
E
No. 6-32 x 1/4 (2)-EP7
No. M-3 x .5 (2)-EP7M
C
B
.235
5.96
1.575
40.01
.157
3.98
.910
23.11
Dia. (2)
1.295
32.89
R
Panel Cutout (back mount)
Tolerance
±
.005 [
0.13]
UL Recognized
CSA Certified
VDE Approved
E
P3/VP3