H Series
Power Inlet Filters & Power Entry Modules
H Series
Power Inlet Line Filter for Medical Equipment
3
169
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
UL Recognized
CSA Certified
VDE Approved*
• Minimal leakage current suitable for medical
equipment
• Two element circuit provides basic EMI
attenuation above 1 MHz
• Available with an internal ground circuit inductor
(C suffix versions) to isolate equipment chassis
from power line ground at radio frequencies
• Flanged mounting the same as the EC, ED and EF
Series
• Capacitive output (see EAH, EBH and EJH Series
for capacitive input)
Ordering Information
3 E H 1 C
Ground Circuit Inductor
Omit if none
Output Styles
Chassis Mount Style
1 – .250 [6.3] spade terminals
3 – Wire leads
Power Inlet Style *
4 – .250 [6.3] spade terminals
(back)
5 – Wire leads (bottom)
8 – Wire leads (back)
9 – .250 [6.3] spade terminals
(bottom)
H Series
Leakage current designation
E – Low Leakage (<0.5 mA)
Current Rating
3, 6, 10 or 15A
EH9
Maximum leakage current each Line to Ground:
@ 120 VAC 60 Hz: 2 A
@250 VAC 50 Hz: 5 A
Hipot rating (one minute):
Line to Ground: 2250 VDC
Line to Line: 1450 VDC
Rated Voltage (max.): 250 VAC
Operating Frequency: 50/60 Hz
Rated Current: 3 to 15A*
Operating Ambient Temperature Range
(at rated current I
r
): -10°C to +40°C
In an ambient temperature (T
a
) higher than +40°C
the maximum operating current (I
o
) is calcula
te
d as
follows: I
o
= I
r
(85-Ta)/45
Specifications
Available Part Numbers
3EH1 6EH8
3EH3 6EH9
6EH1 10EH1
6EH3 10EH3
6EH4 10EH4
6EH5 15EH4
Ground Circuit Inductor Versions
10EH4C
*15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC
EH1
EH8
EH5
*IEC 60320-1 C14 inlet mates with C13 connector
EH4
Electrical Schematic
1
Note 1: 10EH4C version only