6 LAKE STREET, LAWRENCE, MASSACHUSETTS 01841
PHONE (978) 620-2600 FAX (978) 689-0803
WEBSITE: http://www.microsemi.com
123
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
D 1.60 1.70 0.063 0.067
F 0.41 0.55 0.016 0.022
G 3.30 3.70 .130 .146
G1 2.54 REF. .100 REF.
S 0.03 MIN. .001 MIN.
FIGURE 1
DESIGN DATA
CASE: DO-213AA, Hermetically sealed
glass case. (MELF, SOD-80, LL34)
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE: (R
OJEC
):
100 °C/W maximum at L = 0 inch
THERMAL IMPEDANCE: (Z
JX
): 35
°C/W maximum
POLARITY: Diode to be operated with
the banded (cathode) end positive.
MOUNTING SURFACE SELECTION:
The Axial Coefficient of Expansion
(COE) Of this Device is Approximately
+6PPM/°C. The COE of the Mounting
Surface System Should Be Selected To
Provide A Suitable Match With This
Device.
•
1N4614UR-1 THRU 1N4627UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND
JANS
PER MIL-PRF-19500/435
• LEADLESS PACKAGE FOR SURFACE MOUNT
• LOW CURRENT OPERATION AT 250
µ
A
• METALLURGICALLY BONDED
MAXIMUM RATINGS
Operating Temperatures: -65°C to +175°C
DC Power Dissipation: 500mW @ T
EC
= +125°C
Power Derating: 10 mW / °C above T
EC
= +125°C
Forward Voltage @ 200 mA: 1.1 Volts maximum
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise speci½ed.
CDI NOMINAL ZENER MAXIMUM MAXIMUM REVERSE MAXIMUM
TYPE ZENER TEST ZENER LEAKAGE CURRENT DC ZENER
NUMBER VOLTAGE CURRENT IMPEDANCE CURRENT
V
Z
@ I
ZT
I
ZT
Z
ZT
@ I
ZT
1
R
@ V
R
(Note 1) (Note 2)
VOLTS
µ
A OHMS
µ
A VOLTS mA
CDLL4614 1.8 250 1200 7.5 1 120
CDLL4615 2.0 250 1250 5.0 1 110
CDLL4616 2.2 250 1300 4.0 1 100
CDLL4617 2.4 250 1400 2.0 1 95
CDLL4618 2.7 250 1500 1.0 1 90
CDLL4619 3.0 250 1600 0.8 1 87
CDLL4620 3.3 250 1650 7.5 1.5 85
CDLL4621 3.6 250 1700 7.5 2 83
CDLL4622 3.9 250 1650 5.0 2 80
CDLL4623 4.3 250 1600 4.0 2 77
CDLL4624 4.7 250 1550 10.0 3 75
CDLL4625 5.1 250 1500 10.0 3 70
CDLL4626 5.6 250 1400 10.0 4 65
CDLL4627 6.2 250 1200 10.0 5 61
1N4614UR-1
thru
1N4627UR-1
and
CDLL4614 thru CDLL4627
NOTE 1 The CDI type numbers shown above have a Zener voltage tolerance of +5.0%.
Nominal Zener voltage is measured with the device junction in thermal
equilibrium at an ambient temperature of 25°C +
3°C. "C" suffix denotes a + 2%
tolerance and "D" suffix denotes a + 1% tolerance.
NOTE 2 Zener impedance is derived by superimposing on 1
ZT
A 60Hz rms a.c. current equal to
10% of I
ZT.
