D2W Series
• SIP SSR
• Ratings to 3.5A @ 280 VAC
• DC control
• Zero-crossing (resistive loads) output
• Internal snubber network
PRODUCT SELECTION
Control Voltage 2A 3A 3.5A
3-32 VDC D2W202F D2W203F D2W203F-11
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 24-280 24-280 24-280
Transient Overvoltage [Vpk] 600 600 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 8 8 8
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 200 200 200
Maximum Load Current [Arms] 2 3 3.5
Minimum Load Current [Arms] 0.06 0.06 0.06
Maximum Surge Current (16.6ms) [Apk] 28 70 80
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.4 1.4
Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range 3-32 VDC
Must Turn On Voltage 3.0 VDC
Must Turn Off Voltage 1.0 VDC
Typical Input Current @ 5 VDC 3.0 mAdc
Nominal Input Impedance 1500 Ohm
Maximum Turn-On Time [msec] 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)(2) 4000 Vrms
Minimum Insulation Resistance (@ 500 VDC)(2)
10
9
Ohm
Maximum Capacitance, Input/Output 10 pF
Ambient Operating Temperature Range -30 to 80°C
Ambient Storage Temperature Range -30 to 125°C
Weight (typical) 0.6 oz. (17g)
Encapsulation Thermally Conductive Epoxy
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Dielectric and insulation resistance are measured between input and output
3) Off-State dv/dt test method per EIA/NARM standard RS
For Contact information visit our web
site.
www.crydom.com
©2008 Crydom, Inc.
Specifications subject to change without notice.