16mm A6
457
USA: 800-262-IDEC Canada: 888-317-IDEC
Switches & Pilot Lights Display Lights Relays & Sockets Timers Terminal Blocks
Circuit Breakers
Switches & Pilot Devices
A6 Series — Miniature Switches and Pilot Devices: 16mm
Key features:
16mm (5/8”) mounting hole
LED illumination
Compact design saves space
Momentary, Maintained, Selectors, and E-Stops
Gold-clad Silver contacts for reliable low level switching
Snap action contacts
IP40 (dustproof) or IP65 (oiltight) versions
Specifi cations
Degree of Protection
IP40: Dustproof
IP65 Watertight/Oiltight
Contact Confi guration SPDT, DPDT
Maximum Voltage 250V AC/DC
Thermal Current 3A
Minimum Applicable Load 5V AC/DC, 1mA
Contact Material Gold-clad silver
Terminal Style .110” Solder/ Quick Connect
Operating Temperature -25º to +55ºC (no freezing)
Operating Humidity 45 to 85% RH
Contact Resistance 50mΩ maximum (initial value)
Insulation Resistance 100MΩ minimum (500V DC megger)
Vibration Resistance 10 to 55Hz, amplitude 1.5mm p-p
Shock Resistance Damage limits: 500m/sec
2
(approx. 50G) Operating extremes: 200m/sec
2
(approx. 20G)
Electrical Life 100,000 operations minimum (at full rated load)
Mechanical Life
Maintained: 100,000 operations minimum
Momentary: 1,000,000 operations minimum
Selector/Keylock: 250,000 operations minimum
Dielectric Strength
Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles;
1,000V AC, 1 minute between terminals of the same pole;
1,500V AC, 1 minute between contact and lamp terminals.
Illumination Unit: 2,000V AC, 1 min. between live part/ground
Soldering Temperature 20W/5 seconds or 260ºC/3 seconds
Contact Ratings
Operating Voltage 24V 120V 240V
AC (50/60Hz)
Resistive — 1.0A 0.5A
Inductive — 0.7A 0.5A
DC
Resistive 1.0A 0.2A —
Inductive 0.7A 0.1A —
LED Lamp
Ratings
Rated Voltage/Current
5V DC ±5% 6V AC/DC (±10%) 12V AC/DC (±10%) 24V AC/DC (±10%)
8mA
AC: A, R, W, Y: 8mA
G, S: 7mA
DC: A, R, W, Y: 6mA
G, S: 5mA
AC: 9mA
DC: 8mA
AC: 9mA
DC: 8mA
1. AC Inductive Load, PF = 0.6 – 0.7; DC Inductive Load, L/R = 7ms.
2. LED lamp contains a built-in current limiting resistor and a protection diode.
3. LED’s don’t “burn out.” Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously.
•
•
•
•
•
•
•
UL Recognized
File No.E55996
R
CSA Certifi ed
File No. LR21451
