NKK AB11AP-FC

Cross Number:

Item Description: SWITCH PUSH SPST-NO 0.4VA 28V

Qty Price
1 - 5 $3.58142
6 - 9 $2.79460
10 - 14 $2.44188
15 - 18 $2.27909
19 + $2.11630



Other Cross Reference

Manufacturer Date Code Qty Available Qty
NKK
  • Freelance Stock: 22
    Ships Immediately





Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

NKK Switches email: sales@nkkswitches.com Phone (480) 991-0942 Fax (480) 998-1435 www.nkkswitches.com
03-07
Process Sealed Subminiature Pushbuttons Series AB
Distinctive Characteristics
Subminiature size (1/3 size of Series M switches) saves space on
PC boards.
Specically developed for logic-level applications.
Totally sealed body construction prevents contact
contamination and allows time- and money-saving
automated soldering and cleaning.
Award-winning STC contact mechanism with
benets unavailable in conventional mecha-
nisms: smoother, positive detent actuation,
increased contact stability and unparalleled
logic-level reliability. (Additional STC details
in Terms & Acronyms; see Supplement section.)
Molded-in, epoxy sealed or ultrasonically
welded terminals lock out ux, solvents, and
other contaminants.
.100” x .100” (2.54mm x 2.54mm) terminal spacing
conforms to standard PC board grid spacing.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches email: sales@nkkswitches.com Phone (480) 991-0942 Fax (480) 998-1435 www.nkkswitches.com
03-07
Process Sealed Subminiature Pushbuttons Series AB
General Specications
Electrical Capacity (Resistive Load)
Logic Level: 0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
Other Ratings
Contact Resistance: 50 milliohms maximum
Insulation Resistance: 500 megohms minimum @ 500V DC
Dielectric Strength: 500V AC minimum for 1 minute minimum
Mechanical Life: 50,000 operations minimum
Electrical Life: 50,000 operations minimum
Nominal Operating Force: 2.55N
Contact Timing: Nonshorting (break-before-make)
Travel: Pretravel .028” (0.7mm); Overtravel .016” (0.4mm); Total Travel .043” (1.1mm)
Materials & Finishes
Plunger: Polyacetal
Case Housing: Glass ber reinforced polyamide
Support Bracket: Tin plated phosphor bronze
Movable Contact: Phosphor bronze with gold plating
Stationary Contacts: Brass with gold plating
Terminals: Brass with gold plating
Environmental Data
Operating Temp Range: –30°C through +85°C (–22°F through +185°F)
Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)
Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
Shock: 50G (490m/s
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Installation
Cap Installation Force: 49.03N (11.2 lbf) maximum downward force on actuator
PCB Processing
Soldering: Wave Soldering Recommended: See Prole A in Supplement section.
Manual Soldering: See Prole B in Supplement section.
Cleaning: Automated cleaning. See Cleaning specications in Supplement section.
Standards & Certifications
UL Recognition The AB Series pushbuttons have not been tested for UL recognition or CSA certication.
or CSA Certication: These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches email: sales@nkkswitches.com Phone (480) 991-0942 Fax (480) 998-1435 www.nkkswitches.com
03-07
Process Sealed Subminiature Pushbuttons Series AB
POLES
1
SPST
SPDT
2 DPDT
TYPICAL SWITCH ORDERING EXAMPLE
Black .295” (7.5mm) Diameter Cap
DPDT
ON-(ON) Circuit
.213” (5.4mm) Long White Plunger
Straight PC Terminals
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
AB25AP-HA
CAP COLORS
A Black
B White
C Red
PC TERMINALS
P Straight
B Straight with Bracket
B1 Straight with Inline Bracket (SP only)
H Right Angle with Bracket
V Vertical with Bracket
V1 Vertical with Inline Bracket (SP only)
CIRCUITS
1 OFF (ON)
5 ON (ON)
( ) = Momentary
CAPS
F .201” (5.1mm) Diameter
H .295” (7.5mm) Diameter
2AB A5 P H A
PLUNGERS
A .213” (5.4mm) Long
*B .183” (4.65mm) Long
*C
.080” (2.03mm) Long
(cannot be used with cap)
* Available in single pole only
12NEXT

Freelance Electronics
13197 Sandoval Street
Santa Fe Springs, CA 90670

Hours of Operation
Monday-Friday 7:30am-4:30pm PST
(Deadline for next day shipment 2:00pm PST)

Trustworthy Standards Serving the Electronic Components
Industry since 1986

Government Cage code#-1V4R6
Duns Number# 788130532
Certified Small Disadvantaged Business