Document Number: 63138 For any questions, contact: foil@vishay.com
www.vishay.com
Revision: 03-Nov-08 1
RS92N, RS92NA, AN
Vishay Foil Resistors
High Precision Foil Resistor with TCR of
± 2.0 ppm/°C
,
Tolerance of
± 0.01 %
and Load Life Stability
of
± 0.005 %
CECC Qualified
INTRODUCTION
Bulk Metal
®
Foil (BMF) technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
This technology has been pioneered and developed by
VISHAY, and products based on this technology are the
most suitable for a wide range of applications. BMF
technology allows us to produce customer orientated
products, designed to satisfy challenging and specific
technical requirements.
Models RS92N, RS92NA, and AN made from Vishay BMF
offers low TCR, excellent load life stability, tight tolerance,
fast response time, low current noise, low thermal EMF and
low voltage coefficient, all in one resistor.
The RS92N, RS92NA, and AN are virtually insensitive to
destabillizing factors. The resistor element is a solid alloy
that displays the desirable bulk properties of its parent
material, thus it is inherently stable and noise free.
Vishay’s Bulk Metal
®
RS92N, RS92NA, and AN resistors are
the modern generation of precision resistors. The standard
design of these resistors provides a unique combination of
characteristics found in no other single resistor.
Our Application Engineering Department is available to
advise and to make recommendations. For non-standard
technical requirements and special applications, please
contact us.
FEATURES
• Temperature coefficient of resistance (TCR):
± 2 ppm/°C typical (- 55 °C to + 155 °C, ref. + 20 °C)
• Rated power: to 0.25 W at + 125 °C
• Tolerance: ± 0.01 %
• Load life stability: to ± 0.005 % at 70 °C, 2000 h at rated
power
• Resistance range: 80.6 Ω to 120 kΩ (higher or lower
values of resistance are available)
• Electrostatic discharge up to 25 000 V
• Non inductive, non capacitive design
• Rise time: 1 ns effectively no ringing
• Current noise: < - 40 dB
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
• Low inductance: < 0.08 µH typical
• Non hot spot design
• Terminal finishes available: tin/lead alloy
• Matched sets are available per request
(TCR Tracking: to 0.5 ppm/°C)
• For better TCR and PCR performances please review the
RNC90Z
and Z555 datasheets
APPLICATIONS
• High precision amplifiers
• Down-hole (high temperature)
• High precision instrumentation
• Medical and test equipment
• Industrial
• Audio (high end stereo equipment)
• EB applications (electron beam scanning and recording
equipment, electron microscopes)
• Military, airborne
• Measurement instrumentation
TABLE 1 - TOLERANCE AND TCR VS.
RESISTANCE VALUE
(- 55 °C to + 155 °C, + 20 °C Ref.)
RESISTANCE
VALUE
(Ω)
TOLERANCE
(%)
TYPICAL TCR AND
MAX. SPREAD
(ppm/°C)
80.6 to 120K ± 0.01 ± 2 ± 3
TABLE 2 - MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
Mechanical Protection Insulated case
Resistive Element Nickel-chromium
Unit Weight 0.3 g
Temperature Limits - 55 °C to + 155 °C
Climatic Category 55/155/56