NOTES:
1. Dimensions for all drawings are in inches (millimeters).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
3. Pins 2 and 4 typically .050” shorter than pins 1 and 3.
4. Dimensions controlled at housing surface.
NOTES
(Applies to Max Ratings and Characteristics Tables.)
1. Derate power dissipation linearly 1.33 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning
agents.
4. Soldering iron
1/16” (1.6mm) from housing.
5. As long as leads are not under any spring tension.
6. D is the distance from the sensor face to the reflective surface.
7. Cross talk (I
CX
) is the collector current measured with the
indicator current on the input diode and with no reflective surface.
8. Measured using an Eastman Kodak neutral white test card with
90% diffused reflecting as a reflective surface.
1 of 3 100030A
QRD1113/1114
REFLECTIVE OBJECT SENSOR
FEATURES
• Phototransistor Output
• No contact surface sensing
• Unfocused for sensing diffused surfaces
• Compact Package
• Daylight filter on sensor
SCHEMATIC
Parameter Symbol Rating Units
Operating Temperature T
OPR
-40 to +85
°C
Storage Temperature T
STG
-40 to +85
°C
Lead Temperature (Solder Iron)
(2,3)
T
SOL-I
240 for 5 sec
°C
Lead Temperature (Solder Flow)
(2,3)
T
SOL-F
260 for 10 sec
°C
EMITTER
Continuous Forward Current I
F
50 mA
Reverse Voltage V
R
5V
Power Dissipation
(1)
P
D
100 mW
SENSOR
Collector-Emitter Voltage V
CEO
30 V
Emitter-Collector Voltage V
ECO
V
Power Dissipation
(1)
P
D
100 mW
ABSOLUTE MAXIMUM RATINGS
(T
A
= 25°C unless otherwise specified)