www.ti.com
References, PCB Layout, and Bill of Materials
4.2 Bill of Materials (BOM)
Table 3 shows the bill of materials for the BOOSTXL-SENSHUB BoosterPack board.
Table 3. BOOSTXL-SENSHUB Bill of Materials
(1)(2)(3)
Item Ref Des Qty Value Description Manufacturer Manufacturer Part No
IC, digital, barometric pressure
1 U2 1 BMP180 Bosch BMP180
sensor
C1-2, C8-9, C11, Capacitor, ceramic, NPO or C0G or
2 8 100 nF Murata GRM21BR71E104KA01L
C13, C15-16 X5R, 10 V or higher, 0805
(4)
Capacitor, ceramic, X7R, ±10%,
3 C4, C6 2 100 nF Murata GRM21BR71E104KA01L
10 V or higher, 0805
(4)
Capacitor, ceramic, X7R, ±10%,
4 C5 1 10 nF Murata GRM216R71H103KA01D
10 V or higher, 0805
(4)
Capacitor, ceramic, X7R, ±10%,
5 C3 1 2.2 nF Kemet C0805C222K5RACTU
50 V or higher, 0805
(4)
C7, C10, C12, Capacitor, tantalum, 10 V or higher,
6 4 1 μF AVX Corp. TAJA105M020RNJ
C14 Type A
Capacitor, tantalum, 10 V or higher,
7 C17 1 47 μF Nichicon F931A476MAA
Type A
— Y1 0 32.768 kHz Clock oscillator, 2.5 x 3.2 mm Do not populate Do not populate
Light emitting diode, 1.7 V forward
8 D1 1 Red Stanley BR1112H-TR
voltage or less, 0805
9 D2 1 Yellow Light emitting diode, 0805 Knightbright APT2012YC
Header, female, 10-pin, 100-mil
10 J1-4 4 PEC10SAAN Sullins PPTC101LFBN-RC
spacing, 0.100 inch x 10
TFM-110-02- Header, SMT 10x2 pin, shrouded,
11 RF_PART1-2 2 Samtec TFM-110-02-SM-D-A-K-TR
SM-D-A-K-TR 0.225 x 0.625 inch
IC, integrated digital light sensor with
12 U4 1 ISL29023 Intersil ISL29023
interrupt
IC, nine-axis MEMS motion tracking
13 U3 1 MPU-9150 InvenSense MPU-9150
device
Surface mount resistor, 1/10 W or
14 R1, R4, R9-10 4 10 kΩ Yageo RC0805JR-0710KL
higher, 0805
Surface mount resistor, 1/10 W or
— R2 0 10 kΩ Do not populate Do not populate
higher, 0805
Surface mount resistor, 1/10 W or
15 R6 1 5.1 Ω Yageo RC0805JR-075R1L
higher, 0805
Surface mount resistor, 1/10 W or
16 R7 1 100 Ω Yageo RC0805JR-07100RL
higher, 0805
Surface mount resistor, 1/10 W or
17 R5, R8 2 0 Ω Yageo RC0805JR-070RL
higher, 0805
Surface mount resistor, 1/10 W or
18 R3 1 499 kΩ Yageo RC0805FR-07499KL
higher, 0805
Surface mount resistor, 1/10 W or
19 R11-12 2 3.3 kΩ Yageo RC0805JR-073K3L
higher, 0805
20 U5 1 SHT21 IC, humidity and temperature sensor Sensirion AG SHT21
Switch, 1P1T, PB momentary,
21 S1-2 2 7914G Bourns 7914G
100 mA, SM, 0.19 x 0.18 inch
22 U1 1 TMP006AIYZFT IC, infrared thermopile sensor Texas Instruments TMP006YZF
TPS75118Q IC, low dropout voltage regulator,
23 U6 1 Texas Instruments TPS75118QPWP
PWP 1.8 V, 1.5 A
(1)
These assemblies are ESD sensitive. ESD precautions shall be observed.
(2)
These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
(3)
These assemblies must comply with workmanship standards IPC-A-610 Class 2.
(4)
A dielectric with a higher thermal range and/or lower capacitance variation is also permitted (for example, X7R, X9R).
7
SPMU290–April 2013 BOOSTXL-SENSHUB Sensor Hub BoosterPack
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated
