COIL
Power
At Pickup Voltage 120 mW (up to 24 VDC coil) (1 pole)
(typical) 140 mW (48 VDC and 60 VDC coil)
(1 pole)
176 mW (2 pole)
Max. Continuous 1.2 W at 20°C (68°F) ambient
Dissipation
Temperature Rise 20°C (36°F) at nominal coil voltage
Temperature Max. 105°C (221°F)
AZ6962
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• High sensitivity, 120 mW pickup
• Dielectric strength 5000 Vrms
• Isolation spacing greater than 10 mm
• 10kV surge voltage
• Proof tracking index (PTI/CTI) 250
• 10 Amp switching capability
• Epoxy sealed
• UL, CUR file E43203
• VDE file 40010953
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 3 x 10
7
Electrical 1 x 10
5
at 8 A 250 VAC res.
Operate Time (typical) 7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 5000 Vrms coil to contact
(at sea level for 1 min.) 2500 Vrms between contact sets
1500 Vrms between open contacts
Insulation 1000 megohms min. at 20°C, 500 VDC,
Resistance 50% RH
Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration Break Contact: 5 g at 10 …500 Hz
Make Contact: 20 g at 10…500 Hz
Shock 10 g
Enclosure P.B.T. polyester, UL94 V-O
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 8 grams
CONTACTS
Arrangement SPDT (1 Form C), DPDT (2 Form C)
SPST (1 Form A)
Ratings Resistive load:
Max. switched power: 240 W or 2500 VA
(2 Form C: 150 W or 1250 VA)
Max. switched current: 10 A
(2 Form C: 5 A)
Max. switched voltage: 240 VDC* or 440 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL, CUR 10 A at 250 VAC resistive, 30k cycles (1 Form C)
10 A at 30 VDC resistive, 30k cycles (1 Form C)
B300, R300 Pilot Duty (1 Form C)
1/2 HP at 240 VAC, 30k cycles (N.O.)
1/3 HP at 120 VAC, 30k cycles (N.O.)
5 A at 250 VAC resistive, 30k cycles
(2 Form C)
VDE 8 A at 250 VAC resistive, 100k cycles
(1 Form A, and 1 Form C)
Material Silver tin oxide
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
9/27/06W