2003-04-29
AZ832P
CONTACTS
Arrangement DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings Resistive load:
Max. switched power: 60 W or 250 VA
Max. switched current: 5 A
Max. switched voltage: 250 VDC or 250 VAC
*Note: If switching voltage is greater than 30 VDC,
special precautions must be taken. Please contact
the factory.
Rated Load
UL 2 A at 25 VDC resistive
1 A at 120 VAC resistive
Material Gold plated silver against palladium silver.
Gold plated palladium silver against palladium
silver (Suffix “A”)
Resistance < 50 milliohms initially
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
• High sensitivity, 42 mW pickup
• Low profile DIP package
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• Single and dual coil versions
• DC coils to 24 VDC
• High switching capacity, 60 W, 250 VA
• Fits standard 16 pin IC socket
• Epoxy sealed
• UL, CUR file E43203
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 2 x 10
7
Electrical 1 x 10
5
at 2 A, 30 VDC or 1 A, 125 VAC
2 x 10
6
at 1 A, 30 VDC or .5 A, 125 VAC
Set Time (typical) 3 ms at nominal coil voltage
Reset Time (typical) 3 ms at nominal coil voltage
Bounce (typical) 3 ms
Dielectric Strength 1500 Vrms contact to coil
(at sea level) 1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 105°C (221°F)
Vibration 50 g at 10–500 Hz
Shock 50 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 5 grams
COIL
Power
At Pickup Voltage Standard coil: 128 mW
(typical) Sensitive coil: 96 mW
Max. Continuous 0.9 W at 20°C (68°F)
Dissipation
Temperature Max. 115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.