39
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com 6 E-mail: info@cotorelay.com
Environmental Ratings
Storage Temp:
-
35°C to
+
100°C; Operating Temp:
-
20°C to
+
85°C
The operate and release voltage and the coil resistance are
specified at 25°C. These values vary by approximately 0.4%/°C
as the ambient temperature varies.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
9800 Series/Surface Mount Reed Relays
Top View:
Dot stamped on top of relay refers to pin #1 location
Notes:
1
Consult factory for life expectancy at other
switching loads. Contact resistance 2.0Ω defines
end of life.
2
Surface mount component processing tempera-
ture: 438°F(226°C) max for 1 minute dwell time.
Temperature measured on leads where lead exits
molded package.
3
Consists of 20V Zener-diode and 1N1002 diode
in series, connected in parallel with coil.
Model Number 9802 9814 9852
Parameters Test Conditions Units
1 Form A
50
Ω Coaxial
1 Form A
50
Ω Coaxial
1 Form C
50
Ω Coaxial
COIL SPECIFICATIONS
Nom. Coil Voltage VDC 5 3.3 5 3.3 5
Max. Coil Voltage VDC 6 4 6 4 6
Coil Resistance +/- 10%, 25° C Ω 150 70 150 70 110
Operate Voltage Must Operate by VDC - Max. 3.8 2.5 3.8 2.5 3.8
Release Voltage Must Release by VDC - Min. 0.4 0.4 0.4 0.4 0.4
CONTACT RATINGS
Switching Voltage Max DC/Peak AC Resist. Volts 100 100 30
Switching Current Max DC/Peak AC Resist. Amps 0.25 0.25 0.1
Carry Current Max DC/Peak AC Resist. Amps 0.5 0.5 0.2
Contact Rating Max DC/Peak AC Resist. Watts 3 3 3
Life Expectancy-Typical
1
Signal Level 1.0V,10mA
x 10
6
Ops.
250 1000 200 N/O 100N/C
Static Contact Resistance
(max. init.)
50mV, 10mA
Ω
0.125 0.125 0.150
Dynamic Contact Resistance
(max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.150 0.150 0.150
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
x 10
12
10
12
10
9
Capacitance - Typical
Across Open Contacts
o Shield
Shield Floating
Shield Guarding
F
F
pF
-
-
0.2
-
-
0.2
-
-
1.0
Open Contact to Coil
o Shield
Shield Floating
Shield Guarding
F
F
pF
-
-
0.5
-
-
0.5
-
-
1.0
Closed Contact to Coil Shield Guarding pF 0.5 0.5 0.5
Contact to Shield Contacts Open,
Shield Floating
pF - - -
Dielectric Strength
(minimum)
Between Contacts
Contacts to Shield
Contacts/Shield to Coil
VDC/peak AC
VDC/peak AC
VDC/peak AC
200
1500
1500
200
1500
1500
200
1000
1000
Operate Time - including
bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave
msec. 0.25 0.25 0.26
Release Time - Typical
Zener-Diode Suppression
3
msec. 0.05 0.05 0.26