1
1-83
Model 91
MODEL 91
3/8” Diameter
Single Turn
Cermet Trimming
Potentiometer
ELECTRICAL
Standard Resistance Range, Ohms 10 to 2Meg
Standard Resistance Tolerance ±20%
Input Voltage, Maximum 250 Vdc or rms not to exceed power rating
Slider Current, Maximum 100mA or within rated power, whichever is less
Power Rating, Watts 0.5 at 70°C derating to 0 at 125°C
End Resistance, Maximum 2 Ohms
Actual Electrical Travel, Nominal 174°
Dielectric Strength 500 Vrms
Insulation Resistance, Minimum 1,000 Megohms
Resolution Essentially infinite
Contact Resistance Variation, Maximum 1% or 1 Ohm, whichever is greater
ENVIRONMENTAL
Temperature Coefficient, Maximum ±100ppm/°C
Operating Temperature Range –55°C to +125°C
Thermal Shock 5 cycles, –55°C to +125°C (1% ∆RT, 1% ∆VR)
Moisture Resistance Ten 24 hour cycles (1% ∆RT, IR 100 Megohms Min.)
Shock, 6ms Sawtooth 100G’s (1% ∆RT, 1% ∆VR)
Vibration 20G’s, 10 to 2,000 Hz (1% ∆RT, 1% ∆VR)
High Temperature Exposure 250 hours at 125°C (2% ∆RT, 2% ∆VR)
Rotational Life 200 cycles (3% ∆RT)
Load Life at 0.5 Watts 1,000 hours at 70°C (2% ∆RT)
Resistance to Solder Heat 260°C for 10 sec. (1% ∆RT)
MECHANICAL
Mechanical Stops Solid
Stop Strength 12 oz.-in. (0.085 N-m)
Torque, Starting Maximum 5oz.-in. (0.042 N-m)
Weight, Nominal .03 oz. (0.85 grams)
Specifications subject to change without notice.
