Data Sheet
January 19, 2012
12A Analog Pico DLynx
TM
: Non-isolated DC-DC Power Modules
3 – 14.4Vdc input; 0.6Vdc to 5.5Vdc output; 12A output current
LINEAGE POWER 4
General Specifications
Parameter Device Min Typ Max Unit
Calculated MTBF (I
O
=0.8I
O, max
, T
A
=40°C) Telecordia Issue 2
Method 1 Case 3
All 16,817,995 Hours
Weight
⎯
2.33(0.082)
⎯
g (oz.)
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter Device Symbol Min Typ Max Unit
On/Off Signal Interface
(V
IN
=V
IN, min
to V
IN, max
; open collector or equivalent,
Signal referenced to GND)
Device is with suffix “4” – Positive Logic (See Ordering
Information)
Logic High (Module ON)
Input High Current All IIH
⎯
1 mA
Input High Voltage All VIH
3.0
⎯
V
IN,max
Vdc
Logic Low (Module OFF)
Input Low Current All IIL
⎯ ⎯
10 μA
Input Low Voltage All VIL
-0.2
⎯
0.3 Vdc
Device Code with no suffix – Negative Logic (See Ordering
Information)
(On/OFF pin is open collector/drain logic input with
external pull-up resistor; signal referenced to GND)
Logic High (Module OFF)
Input High Current All IIH ― ― 1 mA
Input High Voltage All VIH 3.0 ― V
IN, max
Vdc
Logic Low (Module ON)
Input low Current All IIL ― ― 10 μA
Input Low Voltage All VIL -0.2 ― 0.4 Vdc
Turn-On Delay and Rise Times
(V
IN
=V
IN, nom
, I
O
=I
O, max ,
V
O
to within ±1% of steady state)
Case 1: On/Off input is enabled and then input power is
applied (delay from instant at which V
IN
= V
IN, min
until Vo =
10% of V
o, set)
All Tdelay ― 5 ― msec
Case 2: Input power is applied for at least one second and
then the On/Off input is enabled (delay from instant at
which Von/Off is enabled until V
o = 10% of Vo, set)
All Tdelay ― 5 ― msec
Output voltage Rise time (time for Vo to rise from
10% of Vo, set to 90% of Vo, set
All Trise
― 2 ― msec
Output voltage overshoot (T
A
= 25
o
C 3.0 % V
O, set
V
IN
= V
IN, min
to V
IN, max
,I
O
= I
O, min
to I
O, max
)
With or without maximum external capacitance
Over Temperature Protection All T
ref
120/
130
°C
(See Thermal Considerations section)
