Freelance Electronics Components Distributor
Closed Dec 25th-26th
800-300-1968
We Stock Hard to Find Parts

688-0100

Part # 688-0100
Description
Category MODULE
Availability In Stock
Qty 19
Qty Price
1 - 1 $251.90565
2 - 2 $200.37949
3 - 5 $188.92923
6 - 11 $175.57060
12 + $156.48684
Manufacturer Available Qty
COOK ELECTRIC CO.
  • Shipping Freelance Stock: 19
    Ships Immediately



Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

www.Rose-Bopla.com
158
Brief Description
Not protected
I.P. Ingress Protection Classifications to DIN VDE 0470/EN 60529*
The protection classification offered by an enclosure is shown by the letters IP Ingress Protection, and two digits. The first digit
indicates two factors (protection for persons and equipment). The second digit indicates only one factor, protection against
water.
Similarly, changes in temperature, as may occur, for example, in the open air, are not taken into account. Such changes in
temperature may cause a loss of pressure in the enclosure, and dampness may be absorbed through the seal area.
Rose
+
Bopla can supply pressure compensation elements for this purpose.
Digit
First digit: Protection for persons and equipment
Equipment
Persons
1)
Dust must not penetrate in sufficient quantities to prevent the equipment from operating satisfactorily, or to impair safety.
Important note:The protection classifications given for the enclosures refer to unmachined enclosures as supplied. In the case of protection against water in particular
(second digit), the test conditions will be met if during the given time for the experiment no water has penetrated, or not in harmful quantities. As the tests to show
protection classifications take no account of ageing, the maintenance of the protection classification throughout the lifetime of the equipment in not guaranteed.
*We assume no liability for quoted standards.
Protection against the
back of the
hand touching
dangerous parts
Protection against a
finger touching
dangerous parts
Protection against
a tool touching
dangerous parts
Protection against
a wire touching
dangerous parts
Protection against
a wire touching
dangerous parts
Protection against
a wire touching
dangerous parts
A round body, 50mm in
diameter, must be at a
sufficient distance from
dangerous parts
The test finger, jointed,
12mm in diameter and
80mm long, must be at a
sufficient distance from
dangerous parts
A body, 2.5mm in
diameter, must not be
able to penetrate
A body, 1.0mm in
diameter, must not be
able to penetrate
A body, 1.0mm in
diameter, must not be
able to penetrate
A body, 1.0mm in
diameter, must not be
able to penetrate
Not protected
Protection against a
solid foreign body of
50mm or more
in diameter
Protection against a
solid foreign body of
12.5mm or more
in diameter
Protection against a
solid foreign body of
2.5mm or more
in diameter
Protection against a
solid foreign body of
1.0mm or more
in diameter
Protection against dust
Sealed against dust
A round body, 50mm
in diameter, must
not fully penetrate
A round body, 12.5mm
in diameter, must
not penetrate at all
A round body, 2.5mm
in diameter, must
not penetrate at all
A round body, 1.0mm
in diameter, must not
penetrate at all
No dust penetration
No dust penetration
Brief Description Definition Definition
0
1
6
2
3
4
5
Protection Classifications
For Secondary Services, Product Support, or To Order, Call 1-301-696-9800
159
6
7
8
Example: IP54
first digit 5= protection against dust and wire contact with
dangerous parts
second digit 4= protection against splashing water
Not protected
Digit
Second digit: Protection against water
Protection against vertical
water drops
Protection against vertical
water drops when the
enclosure is inclined at 15°
Protection against water spray
Protection against water spray
Protection against water jet
Protection against powerful water jet
Protection against the effects of
temporary immersion in water
Protection against
the effects of constant
submersion in water
Drops of water falling vertically
onto the enclosure must not have
any harmful effects
Drops of water falling vertically onto the
enclosure must not have any harmful effects
if the enclosure is inclined by up to
15° on both sides of the vertical
Water sprayed onto the enclosure at up
to 60° on both sides of the vertical must
not have any harmful effects
Water splashed onto the enclosure
from any direction must
not have any harmful effects
Water splashed onto the enclosure
from any direction must
not have any harmful effects
A strong water jet directed at the
enclosure from any direction must
not have any harmful effects
Water must not enter in a quantity that could
have harmful effects if the enclosure is
temporarily immersed in water under
standardized pressure and time conditions
Water must not enter in a quantity that could have
harmful effects if the enclosure is kept permanently under
water under conditions agreed between the manufacturer
and the user; however, these must be more severe than
those under figure 7
Brief Description Definition
0
1
2
3
4
5
Protection Classifications
ROSE
+
BOPLA
160
www.Rose-Bopla.com
30 day credit limit requested $
Credit Application
ROSE
+
BOPLA ENCLOSURES 7330 Executive Way Frederick, Maryland 21704-8377 Telephone (301) 696-9800 Fax (301) 696-9494
A PHOENIX MECANO COMPANY
Company Name Phone
Street Address City State Zip
Fax Number Are you incorporated?
Where When
Tax Exemption Number: Please provide Tax Exemption Certificate with Application
Name Title
Name Title
Bank Name Account No. Phone
Bank Name Account No. Phone
Bank Name Account No. Phone
Name Phone Fax
Address City State Zip
Name Phone Fax
Address City State Zip
Name Phone Fax
Address City State Zip
TERMS AND APPLICATION FOR CREDIT: We hereby agree that Rose
+
Bopla terms are Net 30 days
from the date of invoice, with interest charge at 1½ percent per month on all accounts past due.
Signature*:
Authorized By Title Date
DO NOT WRITE BELOW THIS LINE
*It is understood that by signing the Rose
+
Bopla Credit Application you, the customer, agree to
Rose
+
Bopla’s Net 30 credit terms, including a 1½% late finance charge per month for any overdue
balance. By signing this document, you also agree to give Rose
+
Bopla permission to investigate your
credit worthiness through trade references and credit bureau research.
PRINCIPAL
OFFICERS
BANK
REFERENCES
SUPPLIER
REFERENCES
A Phoenix Mecano Company
®
PREVIOUS474849505152535455NEXT