02-2012, Rev. 0212
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
AXICOM
Signal Relays
P1 Relay V23026
(Continued)
Insulation Data
Initial dielectric strength
between open contacts 500V
rms
between contact and coil 1500V
rms
Initial surge withstand voltage
between contact and coil 2500V
Capacitance
between open contacts max. 5pF
between contact and coil max. 6pF
Clearance/creepage
between contact and coil 0.75mm
between adjacent contacts 0.75mm
RF Data
Isolation at 100MHz/900MHz -30.0dB/-18.0dB
Insertion loss at 100MHz/900MHz -0.12dB/-1.9dB
Voltage standing wave ratio (VSWR)
at 100MHz/900MHz 1.06/1.75
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40 to +85°C
Category of environmental protection,
IEC 61810 RT III - immersion cleanable
Vibration resistance (functional) 20g, 200 to 2000Hz
40g, 10 to 200Hz
Shock resistance (functional)
IEC 60068-2-27 (half sine) 50 g
Terminal type PCB terminals and SMT terminals
Weight max. 2g
Resistance to soldering heat THT
IEC 60068-2-20 265 °C/10s
Resistance to soldering heat SMT
IEC 60068-2-58 see reflow profile
Moisture sensitive level, JEDEC J-Std-020D MSL3
Washing not recommended
Ultrasonic cleaning possible
Packaging unit
THT 2000 pcs.
SMT 2400 pcs.
Coil data (continued)
Coil versions, THT and SMT, bistable 2 coils
Coil Rated Set Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω ±10% mW
106 3 2.25 2.25 130 69
101 5 3.75 3.75 390 64
105 9 6.75 6.75 1200 68
102 12 9.00 9.00 1500 96
24
1)
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coils I and II are identical.
1)
A nominal voltage of 24VDC is feasible with a 12VDC coil with a series resistor (1500Ω)
Coil data (continued)
Coil versions, THT, bistable 1 coil
Coil Rated Set Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω ±10% mW
056 3 2.25 -2.25 300 30
051 5 3.75 -3.75 740 34
057 9 6.75 -6.75 2160 38
052 12 9.00 -9.00 4500 32
054 24 18.00 -18.00 4500 128
Coil data (continued)
Coil versions, SMT, bistable 1 coil
Coil Rated Set Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω ±10% mW
051 5 3.75 -3.75 740 34
052 12 9.00 -9.00 4500 32
A nominal voltage of 24V is feasible with a 12V coil with a series resitor (4500Ω)
Other coil voltages on request
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coils I and II are identical.
Coil operative range, bistable
U
max
upper limit of the operative range of the coil voltage (limiting voltage) when coils are
continuously energized.
U
op min
lower limit of the operative range of the coil voltage (reliable operate voltage).
U
rel min
lower limit of the operative range of the coil voltage (reliable release voltage).
108-98009 Rev. E
All specifications subject to change. Consult Tyco Electronics for latest specifications.
5 of 12
Telecom-, Signal and RF Relays
P1 V23026 Relay
AXICOM
Coil Operating Range
U
nom
= Nominal coil voltage
U
max.
= Upper limit of the operative range of
the coil voltage (limiting voltage)
when coils are continously energized
U
op. min.
= Lower limit of the operative range of
the coil voltage (reliable operate
voltage)
U
rel. min.
= Lower limit of the operative range of
the coil voltage (reliable release
voltage)
Umax. at 0 A
U
max. at - 1 A
U
nom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/U
nom
]
Umax. at 0 A
65 mW
130 mW
Ambient Temperature [°C]
Coil Voltage [U/U
nom]
Unom. nominal coil voltage
Umax. - 100 % coil duty at 0 A
65 mW Latching
32 mW Latching
Umax. - 5 % coil duty at 1 A
Umax. - 5 % coil duty at 0 A
Uset min.
