FEATURES /
BENEFITS
RoHS compliant
Long life - typically 100K hours
Low power consumption - uses up to 90% less energy
than an incandescent indicator
Front panel snap-in mounting requires no additional hardware
No heat generated
Resistant to shock and vibration
Termination - straight terminals for wire wrapping or
lead wire for soldering or optional terminals
Colors include - red, green, yellow
558 Series
5V Integral Resistor
Snap-in LED - .156” Mounting Hole
Panel Mount Indicators
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
MDEL558SI001_B
APPLICATIONS
Dialight's 558 series LED panel mount indicator is available with
a variety of LEDs including AlInGaP and InGaN technology for
high brightness applications, bicolor and integral resistors. These
indicators are designed for a variety of applications such as:
• Main and remote power indication
• Maintenance and warning indication
• Status indication • Instrumentation
……..and many more!
SPECIFICATIONS
Voltage requirements: 5 VDC (No resistors required) Operating temperature: -40°C to +85°C
Mounting hole size: 0.155 - 0.158" (3.94 - 4.01 mm) Storage temperature: -55°C to +100°C
Panel thickness: 0.031 - 0.062" (.787 - 1.57 mm) Electrical connection
Housing: Black housing material meets Straight terminals for wire wrapping or either
UL94V-0 and enhances LED contrast 6 or 14 inch 26 AWG lead wire
Please see back of page for part numbers and additional specifications.
SQ.
*26 AWG 6” WIRE LEADS - TERMINATION OPTION 003
26 AWG 14” WIRE LEADS - TERMINATION OPTION 007
NOTE: WIRE LEAD COLOR RED (ANODE) AND BLACK (CATHODE)
Dimensions in mm [inches]
*