SPEC NO: DSAF1343 REV NO: V.2 DATE: MAY/05/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203003838
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
iewing
Angle
[1]
Min. Typ. 2θ1/2
APHCM2012SURCK-F01 Hyper Red (InGaAlP) WATER CLEAR 50 150
110
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650 nm I
F=20mA
λD [1] Dominant Wavelength Hyper Red 635 nm I
F=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28 nm I
F=20mA
C Capacitance Hyper Red 35 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
I
R Reverse Current Hyper Red 10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C