© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
SMT Power Inductors
–
DT3316P Series
Document 180-1
Document 180-1 Revised 01/26/09
Energy Switching
Inductance
2
DCR max SRF typ
Isat (A)
3
Irms
4
storage max frequency
Part number
1
±20% (µH) (Ohms) (MHz) 20% drop 30% drop (A) (µJoules) max
DT3316P-102ML_ 1.0 0.025 60 4.5 8.0 4.0 9 1 MHz
DT3316P-152ML_ 1.5 0.030 55 4.0 5.5 4.0 12 1 MHz
DT3316P-222ML_ 2.2 0.035 55 1.9 3.0 4.0 15 1 MHz
DT3316P-332ML_ 3.3 0.040 50 1.6 2.8 4.0 16 1 MHz
DT3316P-472ML_ 4.7 0.045 45 1.5 2.4 3.0 10 1 MHz
DT3316P-682ML_ 6.8 0.050 40 1.3 2.2 2.5 14 1 MHz
DT3316P-103ML_ 10 0.055 35 0.80 1.2 2.0 11 1 MHz
DT3316P-153ML_ 15 0.060 25 0.65 1.1 1.8 12 1 MHz
DT3316P-223ML_ 22 0.084 22 0.60 1.0 1.5 11 1 MHz
DT3316P-333ML_ 33 0.090 18 0.55 0.90 1.3 13 1 MHz
DT3316P-473ML_ 47 0.11 16 0.32 0.50 1.0 13 1 MHz
DT3316P-683ML_ 68 0.15 12 0.28 0.45 0.90 17 1 MHz
DT3316P-104ML_ 100 0.29 9.0 0.28 0.40 0.80 15 1 MHz
DT3316P-154ML_ 150 0.36 8.0 0.21 0.35 0.60 15 500 kHz
DT3316P-224ML_ 220 0.39 6.0 0.17 0.26 0.50 10 500 kHz
DT3316P-334ML_ 330 0.73 5.0 0.13 0.20 0.40 13 500 kHz
DT3316P-474ML_ 470 0.88 4.0 0.11 0.18 0.35 13 500 kHz
DT3316P-684ML_ 680 1.15 3.0 0.09 0.14 0.30 13 500 kHz
DT3316P-105ML_ 1000 1.45 2.5 0.085 0.14 0.25 13 500 kHz
1. When ordering, please specify termination and packaging codes:
DT3316P-105MLD
Termination: L = RoHS compliant gold over nickel over phos bronze.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: D =13″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc.
3. DC current at which the inductance drops from its value without current.
4. Current that causes a 10°C temperature rise from 25°C ambient.
5. Ambient temperature range:
–
40°C to +85°C with Irms current
+85°C to +95°C with derated current
6. Storage temperature range: Component:
–
40°C to +85°C
Packaging:
–
40°C to +80°C
7. Resistance to soldering heat: Three reflows at >217°C for 90 seconds
(+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room
temperature between.
8. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
See Color Coding section for part marking information.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
These magnetically shielded inductors are designed for
a wide variety of applications, including board mounted
DC-DC converters, miniature power supplies and volt-
age multiplying circuits. They function equally well in
filter and smoothing circuit applications.
The Coilcraft DT Series is specially designed to provide
the low-loss benefit of ferrite, with a soft saturation
characteristic, allowing best performance at both light
load and high peak current conditions.
For new designs, consider the MSS7341, MSS1038
or MSS1260 as alternatives to this series. These
series are more cost effective and offer better current
handling. In addition, the MSS7341 is a significantly
smaller part. We will continue to manufacture and sup-
port the DT3316P indefinitely.