SA5.0 THRU SA170CA
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power
l
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l
Glass passivated chip junction
l
500W Peak Pulse Power capability on
10/1000 £gS waveform
l
Excellent clamping capability
l
Repetition rate(duty cycle): 0.01%
l
Low incremental surge resistance
l
Fast response time: typically less
than 1.0 ps from 0 volts to BV for unidirectional
and 5.0ns for bidirectional types
l
Typical I
D
less than 1
£g
A above 10V
l
High temperature soldering guaranteed:
300 ¢J/10 seconds/.375”,(9.5mm) lead
length/5lbs., (2.3kg) tension
Case: JEDEC DO-15 molded plastic over passivated junction
Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denoteds positive end(cathode) except Bidirectionals
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
Ratings at 25 ¢J ambient temperature unless otherwise specified.
RATING SYMBOL VALUE UNITS
Peak Pulse Power Dissipation on 10/1000
£g
S waveform
(Note 1, FIG.1)
P
Minimum 500 Watts
Peak Pulse Current of on 10/1000 £gS waveform
(Note 1, FIG.3)
I
SEE TABLE 1 Amps
Steady State Power Dissipation at T
L
=75 ¢J Lead
Lengths .375”,(9.5mm) (Note 2)
P
1.0 Watts
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load, Unidirectional only
(JECED Method) (Note 3)
I
70 Amps
Operating Junction and Storage Temperature Range T
,T
-65 to +175 ¢J
NOTES:
1. Non-repetitive current pulse, per Fig. 3 and derated above T
A
=25
¢J
per Fig. 2.
2. Mounted on Copper Leaf area of 1.57in
2
(40mm
2
) PER Figure 5.
3. 8.3ms single half sine-wave or equivalent square wave, Duty cycle= 4 pulses per minute maximum.