National Semiconductor Corp 100313QC

Cross Number:

Item Description: Driver 4-CH Inverting/Non-Inverting ECL 28-Pin PLCC Rail

Qty Price
1 + $3.03400



Other Cross Reference

Manufacturer Date Code Qty Available Qty
National Semiconductor Corp 9724
  • Freelance Stock: 2
    Ships Immediately


National Semiconductor Corp 9724
  • Freelance Stock: 1
    Ships Immediately





Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

© 2000 Fairchild Semiconductor Corporation DS010249 www.fairchildsemi.com
September 1989
Revised August 2000
100313 Low Power Quad Driver
100313
Low Power Quad Driver
General Description
The 100313 is a monolithic quad driver with two OR and
two NOR outputs and common enable. The common input
is buffered to minimize input loading. If the D inputs are not
used the Enable can be used to drive sixteen 50
lines. All
inputs have 50 k
pull-down resistors and all outputs are
buffered.
Features
50% power reduction of the 100113
2000V ESD protection
Pin/function compatible with 100113 and 100112
Voltage compensated operating range
= 4.2V to 5.7V
Available to industrial grade temperature range
(PLCC package only)
Ordering Code:
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
Pin Descriptions
Connection Diagrams
24-Pin DIP/SOIC
28-Pin PLCC
Order Number Package Number Package Description
100313SC M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
100313PC N24E 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide
100313QC V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square
100313QI V28A 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square
Industrial Temperature Range (
40°C to +85°C)
Pin Names Description
D
a
D
d
Data Inputs
E Enable Input
O
na
O
nd
Data Outputs
O
na
O
nd
Complementary Data Outputs
www.fairchildsemi.com 2
100313
Truth Table
H = HIGH Voltage Level
L = LOW Voltage Level
X = Dont Care
Inputs Outputs
E
D
a
D
b
D
c
D
d
O
1a
, 0
2a
O
1a
, O
2a
O
1b
, 0
2b
O
1b
, 0
2b
O
1c
, 0
2c
O
1c
, 0
2c
O
1d
, 0
2d
O
1d
, 0
2d
HXXXXH L H LHLHL
LLLLL L H L H L H L H
LLLLH L H L H L H H L
LLLHL L H L H H L L H
LLLHHL H L HHLHL
LLHLL L H H L L H L H
LLHLH L H H L L H H L
LLHHL L H H L H L L H
LLHHHL H H LHLHL
LHLLLH L L HLHLH
LHLLH H L L H L H H L
LHLHL H L L H H L L H
LHLHH H L L H H L H L
LHHLL H L H L L H L H
LHHLH H L H L L H H L
LHHHL H L H L H L L H
LHHHHH L H LHLHL
3 www.fairchildsemi.com
100313
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The Recommended Operating Conditions table will define the conditions
for actual device operation.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Commercial Version
DC Electrical Characteristics
(Note 3)
V
EE
= 4.2V to 5.7V, V
CC
= V
CCA
= GND, T
C
= 0°C to +85°C
Note 3: The specified limits represent the worst case value for the parameter. Since these values normally occur at the temperature extremes, additional
noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are cho-
sen to guarantee operation under worst case conditions.
DIP AC Electrical Characteristics
V
EE
= 4.2V to 5.7V, V
CC
= V
CCA
= GND
Note 4: The propagation delay specified is for single output switching. Delays may vary up to 150 ps with multiple outputs switching.
Storage Temperature (T
STG
) 65°C to +150°C
Maximum Junction Temperature (T
J
) +150°C
V
EE
Pin Potential to Ground Pin 7.0V to +0.5V
Input Voltage (DC) V
EE
to +0.5V
Output Current (DC Output HIGH)
50 mA
ESD (Note 2)
2000V
Case Temperature (T
C
)
Commercial 0
°C to +85°C
Industrial
40°C to +85°C
Supply Voltage (V
EE
) 5.7V to 4.2V
Symbol Parameter Min Typ Max Units Conditions
V
OH
Output HIGH Voltage 1025 955 870
mV
V
IN
=V
IH (Max)
Loading with
V
OL
Output LOW Voltage 1830 1705 1620 or V
IL (Min)
50 to 2.0V
V
OHC
Output HIGH Voltage 1035
mV
V
IN
= V
IH (Min)
Loading with
V
OLC
Output LOW Voltage 1610 or V
IL (Max)
50 to 2.0V
V
IH
Input HIGH Voltage 1165 870 mV Guaranteed HIGH Signal
for All Inputs
V
IL
Input LOW Voltage 1830 1475 mV Guaranteed LOW Signal
for All Inputs
I
IL
Input LOW Current 0.50 µAV
IN
= V
IL (Min)
I
IH
Input HIGH Current
Data 350 µAV
IN
= V
IH (Max)
Enable 240
I
EE
Power Supply Current 59 29 mA Inputs OPEN
Symbol Parameter
T
C
= 0°CT
C
= +25°CT
C
= +85°C
Units Conditions
Min Max Min Max Min Max
t
PLH
Propagation Delay
0.55 1.30 0.55 1.30 0.55 1.40 ns
t
PHL
Data to Output Figures 1, 2
t
PLH
Propagation Delay
0.80 1.80 0.80 1.80 0.80 1.90 ns
(Note 4)
t
PHL
Enable to Output
t
TLH
Transition Time
0.45 1.30 0.45 1.30 0.45 1.30 ns Figures 1, 2
t
THL
20% to 80%, 80% to 20%
123NEXT

Freelance Electronics
13197 Sandoval Street
Santa Fe Springs, CA 90670

Hours of Operation
Monday-Friday 7:30am-4:30pm PST
(Deadline for next day shipment 2:00pm PST)

Trustworthy Standards Serving the Electronic Components
Industry since 1986

Government Cage code#-1V4R6
Duns Number# 788130532
Certified Small Disadvantaged Business