Freelance Electronics Components Distributor
Closed Dec 25th-26th
800-300-1968
We Stock Hard to Find Parts

LMC555CMMX

Part # LMC555CMMX
Description Standard Timer Single 8-Pin MSOP T/R - R01
Category IC
Availability Out of Stock
Qty 0
Qty Price
1 + $0.41000



Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

LMC555
www.ti.com
SNAS558J FEBRUARY 2000REVISED MARCH 2013
LMC555 CMOS Timer
Check for Samples: LMC555
1
FEATURES
DESCRIPTION
2
Less than 1 mW Typical Power Dissipation at
The LMC555 is a CMOS version of the industry
5V Supply
standard 555 series general purpose timers. In
3 MHz Astable Frequency Capability
addition to the standard package (SOIC, VSSSOP,
1.5V Supply Operating Voltage Ensured
and PDIP) the LMC555 is also available in a chip
sized package (8 Bump DSBGA) using TI's DSBGA
Output Fully Compatible with TTL and CMOS
package technology. The LMC555 offers the same
Logic at 5V Supply
capability of generating accurate time delays and
Tested to 10 mA, +50 mA Output Current
frequencies as the LM555 but with much lower power
Levels
dissipation and supply current spikes. When operated
Reduced Supply Current Spikes During Output
as a one-shot, the time delay is precisely controlled
by a single external resistor and capacitor. In the
Transitions
stable mode the oscillation frequency and duty cycle
Extremely Low Reset, Trigger, and Threshold
are accurately set by two external resistors and one
Currents
capacitor. The use of Texas Instruments' LMCMOS
Excellent Temperature Stability
process extends both the frequency range and low
supply capability.
Pin-for-Pin Compatible with 555 Series of
Timers
Available in 8-pin VSSOP Package and 8-Bump
DSBGA package
Pulse Width Modulator
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2000–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
LMC555
SNAS558J FEBRUARY 2000REVISED MARCH 2013
www.ti.com
Connection Diagram
Figure 1. 8-Pin SOIC, VSSOP, PDIP
Top View
Figure 2. 8-Bump DSBGA
Top View (Bump Side Down)
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: LMC555
LMC555
www.ti.com
SNAS558J FEBRUARY 2000REVISED MARCH 2013
Table 1. Pin Descriptions
Package Pin Numbers
Pin Name
8-Pin SOIC, VSSOP, and PDIP 8-Bump DSBGA
GND 1 A3
Trigger 2 B3
Output 3 C3
Reset 4 C2
Control Voltage 5 C1
Threshold 6 B1
Discharge 7 A1
V
+
8 A2
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)(3)
Supply Voltage, V
+
15V
Input Voltages, V
TRIG
, V
RES
, V
CTRL
, V
THRESH
0.3V to V
S
+ 0.3V
Output Voltages, V
O
, V
DIS
15V
Output Current I
O
, I
DIS
100 mA
Storage Temperature Range 65°C to +150°C
Soldering specification for PDIP package:
Soldering (10 seconds) 260°C
Soldering specification for all other packages:
see product folder at www.ti.com and http://www.ti.com/lit/SNOA549
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical
specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the
Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication
of device performance.
(2) See AN-1112 (SNVA009) for DSBGA considerations.
(3) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
Operating Ratings
(1)(2)
Temperature Range
LMC555IM 40°C to +125°C
LMC555CM/MM/N/TP 40°C to +85°C
Thermal Resistance (θ
JA
)
(1)
SOIC, 8-Pin 169°C/W
VSSOP, 8-Pin 225°C/W
PDIP, 8-Pin 111°C/W
8-Bump DSBGA 220°C/W
Maximum Allowable Power Dissipation @25°C
PDIP-8 1126 mW
SOIC-8 740 mW
VSSOP-8 555 mW
8-Bump DSBGA 568 mW
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state DC and AC electrical
specifications under particular test conditions which ensure specific performance limits. This assumes that the device is within the
Operating Ratings. Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication
of device performance.
(2) See AN-1112 (SNVA009) for DSBGA considerations.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: LMC555
1234567NEXT