LM6152
,
LM6154
SNOS752E –MAY 1999–REVISED SEPTEMBER 2014
LM6152/LM6154 Dual and Quad 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers
1 Features 3 Description
Using patented circuit topologies, the
1
• At V
S
= 5V, typical unless noted.
LM6152/LM6154 provides new levels of speed vs.
• Greater than Rail-to-rail Input CMVR −0.2 5V to
power performance in applications where low voltage
5.25 V
supplies or power limitations previously made
• Rail-to-rail Output Swing 0.01 V to 4.99 V
compromise necessary. With only 1.4 mA/amplifier
supply current, the 75 MHz gain bandwidth of this
• Wide Gain-bandwidth 75 MHz @ 100 kHz
device supports new portable applications where
• Slew Rate
higher power devices unacceptably drain battery life.
– Small Signal 5 V/µs
The slew rate of the devices increases with
increasing input differential voltage, thus allowing the
– Large Signal 45 V/µs
device to handle capacitive loads while maintaining
• Low Supply Current 1.4 mA/amplifier
large signal amplitude.
• Wide Supply Range 2.7 V to 24 V
The LM6152/LM6154 can be driven by voltages that
• Fast Settling Time of 1.1 µs for 2 V Step (to
exceed both power supply rails, thus eliminating
0.01%)
concerns about exceeding the common-mode voltage
• PSRR 91 dB
range. The rail-to-rail output swing capability provides
the maximum possible dynamic range at the output.
• CMRR 84 dB
This is particularly important when operating on low
supply voltages.
2 Applications
Operating on supplies from 2.7 V to over 24 V, the
• Portable High Speed Instrumentation
LM6152/LM6154 is excellent for a very wide range of
• Signal Conditioning Amplifier/ADC Buffers
applications, from battery operated systems with
• Barcode Scanners
large bandwidth requirements to high speed
instrumentation.
Device Information
(1)
PART NUMBER PACKAGE BODY SIZE (NOM)
LM6152 SOIC (8) 4.902 mm × 3.912 mm
LM6154 SOIC (14) 8.636 mm × 3.912 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Offset Voltage vs. Supply voltage
Supply Current vs. Supply Voltage
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.