LM6132
,
LM6134
SNOS751E –APRIL 2000–REVISED SEPTEMBER 2014
LM6132/LM6134 Dual and Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers
1 Features 3 Description
The LM6132/34 provides new levels of speed vs.
1
• (For 5V Supply, Typ Unless Noted)
power performance in applications where low voltage
• Rail-to-Rail Input CMVR −0.25 V to 5.25 V
supplies or power limitations previously made
• Rail-to-Rail Output Swing 0.01V to 4.99V
compromise necessary. With only 360 μA/amp supply
current, the 10 MHz gain-bandwidth of this device
• High Gain-Bandwidth, 10 MHz at 20 kHz
supports new portable applications where higher
• Slew Rate 12 V/μs
power devices unacceptably drain battery life.
• Low Supply Current 360 μA/Amp
The LM6132/34 can be driven by voltages that
• Wide Supply Range 2.7 V to over 24 V
exceed both power supply rails, thus eliminating
• CMRR 100 dB
concerns over exceeding the common-mode voltage
range. The rail-to-rail output swing capability provides
• Gain 100 dB with R
L
= 10 k
the maximum possible dynamic range at the output.
• PSRR 82 dB
This is particularly important when operating on low
supply voltages. The LM6132/34 can also drive large
2 Applications
capacitive loads without oscillating.
• Battery Operated Instrumentation
Operating on supplies from 2.7 V to over 24 V, the
• Instrumentation Amplifiers
LM6132/34 is excellent for a very wide range of
applications, from battery operated systems with
• Portable Scanners
large bandwidth requirements to high speed
• Wireless Communications
instrumentation.
• Flat Panel Display Driver
Device Information
(1)
PART NUMBER PACKAGE BODY SIZE (NOM)
LM6132 SOIC (8) 4.90 mm x 3.91 mm
LM6132 PDIP (8) 9.81 mm x 6.35 mm
LM6134 SOIC (14) 8.65 mm x 3.91 mm
LM6134 PDIP (14) 19.177 mm x 6.35 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Offset Voltage vs. Supply Voltage
Supply Current vs. Supply Voltage
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
