Fairchild Semiconductor 145P11

Cross Number:

Item Description:







Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

Product Description
Features
SWFC Series 980 nm
1310
nm
S
Band
C
Band
L
Band
C+L
Band
Unit
Wavelength Range
970 ~ 990
1270 ~
1350
1420 ~
1500
1530 ~
1565
1570 ~
1605
1530 ~
1610
nm
Fiber Type
Corning HI980
Corning HI1060
OFS BF05635-02
Corning SMF-28
Insertion Loss
[1]
See Insertion Loss Table I, II, III dB
Return Loss (Min) 55 dB
Directivity (Min) 55 dB
TDL
[2]
(Max) Signal Path: <0.1dB, Tap Path: <0.15 dB dB
Maximum Power Handling 4 W
Operating Temperature
Range
[3]
- 40 to + 75 °C
Storage Temperature
Range
- 40 to + 85 °C
Package Dimensions
**
P1: 250 µm bare ber
P2: 900 µm loose tube
P3: 3mm cable
(Ø) 3.0 x (L) 47.0
(Ø) 3.0 x (L) 60.0
(L) 96.0 x (W) 12.0 x (H) 6.4
mm
Applications
Performance Specificationns
Note:
[1] Values are referenced without connector loss.
[2] Temperature Sensitivity Coecient ~0.002dB/°C at the range of –5 to 75°C.
[3] Operating temperature range changes to -5 to 75°C in P2, P3 package and all package with connectors
[4] The mechanical tolerance should be +/- 0.2 mm on all package dimensions unless otherwise custom specied.
Port 1 In
L
Ø
Port 2 Main (High%)
Port 3 Tap
Port 4 (terminated for
1x2 configuration)
(Low%)
S0070 - R08. 20111017
Single Window Single Mode Wideband
Fiber Coupler
(980, 1310, S, C, L, and C+L band)
SWFC Series
The Oplink fused single window wideband ber 1x2 (2x2) couplers provide
accurate optical signal coupling and splitting over wide bandwidth with high
performance and high reliability. These couplers have excellent uniformity,
low excess loss and very low polarization sensitivity and are available with
various tap ratios, wavelength ranges, ber types, and connector options. All
devices are shown to be able to handle high optical power up to 4W and are
tested according to industry standard procedures. Reliability is guaranteed
through stringent tests to fully meet Telcordia GR-1221 requirements.
Wavelength Independent
Low Insertion Loss and PDL
High Power Handling
Guranteed Reliability
Signal monitoring in EDFA
Network Monitoring
CAT V
Local Area Networks
Testing Instruments
Laboratory R&D
Single Window Single Mode Wideband Fiber
Coupler (980, 1310, S, C, L, and C+L band)
SWFC Series
Oplink Communications, Inc
Insertion Loss Tables
Insertion Loss (IL) II : 1310nm, S
2
or C+L band coupler
Insertion Loss (IL) I : C or L band coupler
Coupling Ratio
P Grade A Grade
IL
1
(dB) WDL
2
(dB) PDL
3
(dB) IL
1
(dB) WDL
2
(dB) PDL
3
(dB)
Signal Tap Signal Tap Signal Tap Signal Tap Signal Tap Signal Tap
99/1 ≤0.20 19.0-21.0 ≤0.08 ≤0.50 ≤0.04 ≤0.12 ≤0.20 17.7-21.5 ≤0.10 ≤0.55 ≤0.05 ≤0.15
98/2 ≤0.25 16.4-18.4 ≤0.10 ≤0.40 ≤0.04 ≤0.12 ≤0.30 16.0-19.4 ≤0.10 ≤0.45 ≤0.05 ≤0.15
97/3 ≤0.30 14.6-16.2 ≤0.10 ≤0.30 ≤0.04 ≤0.12 ≤0.35 14.0-16.8 ≤0.10 ≤0.40 ≤0.05 ≤0.15
95/5 ≤0.35 12.4-13.8 ≤0.12 ≤0.25 ≤0.04 ≤0.10 ≤0.40 12.0-14.4 ≤0.12 ≤0.30 ≤0.05 ≤0.15
90/10 ≤0.60 9.60-10.8 ≤0.12 ≤0.22 ≤0.05 ≤0.10 ≤0.65 9.20-11.2 ≤0.13 ≤0.26 ≤0.06 ≤0.14
85/15 ≤0.85 7.80-8.80 ≤0.15 ≤0.20 ≤0.05 ≤0.10 ≤0.90 7.5-9.0 ≤0.15 ≤0.25 ≤0.06 ≤0.14
80/20 ≤1.15 6.60-7.60 ≤0.15 ≤0.20 ≤0.05 ≤0.10 ≤1.15 6.4-8.0 ≤0.16 ≤0.23 ≤0.07 ≤0.13
75/25 ≤1.35 5.75-6.50 ≤0.15 ≤0.20 ≤0.06 ≤0.10 ≤1.44 5.6-6.7 ≤0.16 ≤0.22 ≤0.07 ≤0.13
70/30 ≤1.75 5.00-5.50 ≤0.15 ≤0.20 ≤0.06 ≤0.10 ≤1.82 4.9-5.8 ≤0.16 ≤0.20 ≤0.08 ≤0.12
65/35 ≤2.10 4.40-4.90 ≤0.15 ≤0.20 ≤0.07 ≤0.10 ≤2.15 4.3-5.0 ≤0.16 ≤0.20 ≤0.08 ≤0.12
60/40 ≤2.50 3.95-4.30 ≤0.15 ≤0.20 ≤0.07 ≤0.09 ≤2.60 3.7-4.6 ≤0.17 ≤0.20 ≤0.08 ≤0.10
55/45 ≤2.85 3.35-3.80 ≤0.15 ≤0.20 ≤0.07 ≤0.09 ≤2.90 3.1-4.0 ≤0.17 ≤0.20 ≤0.09 ≤0.10
50/50 2.80-3.30 ≤0.20 ≤0.08 2.70-3.30 ≤0.22 ≤0.10
Coupling Ratio
P Grade A Grade
IL
1
(dB) WDL
2
(dB) PDL
3
(dB) IL
1
(dB) WDL
2
(dB) PDL
3
(dB)
Signal Tap Signal Tap Signal Tap Signal Tap Signal Tap Signal Tap
99/1 ≤0.20 18.2-21.0 ≤0.09 ≤0.90 ≤0.04 ≤0.15 ≤0.23 17.4-21.5 ≤0.10 ≤1.20 ≤0.05 ≤0.20
98/2 ≤0.25 16.0-18.6 ≤0.09 ≤0.80 ≤0.04 ≤0.12 ≤0.30 15.2-19.8 ≤0.11 ≤1.00 ≤0.05 ≤0.15
97/3 ≤0.30 14.4-16.4 ≤0.10 ≤0.70 ≤0.04 ≤0.12 ≤0.34 13.7-17.1 ≤0.12 ≤0.90 ≤0.05 ≤0.15
95/5 ≤0.40 12.2-14.0 ≤0.13 ≤0.60 ≤0.04 ≤0.10 ≤0.40 11.8-14.7 ≤0.15 ≤0.80 ≤0.05 ≤0.15
90/10 ≤0.65 9.40-11.0 ≤0.15 ≤0.50 ≤0.05 ≤0.10 ≤0.65 9.00-11.3 ≤0.16 ≤0.60 ≤0.06 ≤0.15
85/15 ≤0.95 7.70-8.85 ≤0.15 ≤0.45 ≤0.05 ≤0.10 ≤0.85 7.4-9.1 ≤0.18 ≤0.67 ≤0.06 ≤0.15
80/20 ≤1.20 6.30-7.80 ≤0.17 ≤0.40 ≤0.05 ≤0.10 ≤1.15 6.0-8.1 ≤0.20 ≤0.55 ≤0.07 ≤0.14
75/25 ≤1.60 5.45-6.70 ≤0.18 ≤0.40 ≤0.06 ≤0.10 ≤1.44 5.4-6.8 ≤0.20 ≤0.53 ≤0.07 ≤0.14
70/30 ≤1.80 4.60-5.75 ≤0.22 ≤0.40 ≤0.06 ≤0.10 ≤1.82 4.6-5.9 ≤0.25 ≤0.50 ≤0.08 ≤0.13
65/35 ≤2.10 4.10-5.05 ≤0.23 ≤0.38 ≤0.07 ≤0.10 ≤2.15 4.2-5.0 ≤0.30 ≤0.50 ≤0.08 ≤0.13
60/40 ≤2.55 3.85-4.40 ≤0.25 ≤0.35 ≤0.07 ≤0.09 ≤2.60 3.7-4.6 ≤0.35 ≤0.48 ≤0.09 ≤0.11
55/45 ≤2.90 3.15-3.85 ≤0.30 ≤0.35 ≤0.07 ≤0.09 ≤2.81 3.1-4.0 ≤0.40 ≤0.48 ≤0.09 ≤0.11
50/50 2.70-3.40 ≤0.35 ≤0.08 2.60-3.50 ≤0.40 ≤0.10
1. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL).
2. Insertion loss change over the specied wavelength range.
3. Insertion loss change over the all input polarization states
1. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL). For S-band product, add 0.1dB due to water absorption peak of ber.
2. Insertion loss change over the specied wavelength range. For S-band product, add 0.1dB in WDL due to water absorption peak of ber.
3. Insertion loss change over the all input polarization states.
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com
SWFC
Ordering Information
Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplication Transmission Interconnect RGB Laser Modules
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
Insertion Loss (IL) III : 980nm coupler
SWFC Series
Single Window Single Mode Wideband Fiber
Coupler (980, 1310, S, C, L, and C+L band)
00
Package & Fiber Type
Tap Ratio
Grade
Type
P1 + Corning SMF-28 = 11
P2 + SMF-28 in 900 µm loose tube = 22
P3 + SMF-28 in 3 mm cable = 33
P1 + Corning HI1060 = 16
P1 + Corning HI980 = 19
P1 + OFS BF05635-02 = 17
P2 + Corning HI1060 = 26
P2 + Corning HI980 = 29
P2 + OFS BF05635-02 = 27
P3 + Corning HI1060 = 36
P3 + Corning HI980 = 39
P3 + OFS BF05635-02 = 37
50/50 = 50
45/55 = 45
40/60 = 40
35/65 = 35
30/70 = 30
25/75 = 25
20/80 = 20
15/85 = 15
10/90 = 10
5/95 = 05
3/97 = 03
2/98 = 02
1/99 = 01
Premium Grade = P
A Grade = A
1x2 = 1
2x2 = 2
Wavelength
Fiber Length**
980 nm = 9
1310 nm = 3
C band = 5
S band = 4
L band = 6
C+L band = 1
0.5 Meter = H
1.0 Meter = 1
1.5 Meters = 5
2.0 Meters = 2
Connector Type
None = 1
FC/PC = 2
FC/SPC = 3
FC/APC = 4
SC/PC = 5
SC/SPC = 6
SC/APC = 7
ST = 8
LC/UPC = 9
MU = A
LC/APC = B
S0070 - R08. 20111017
Notes :
* For HI1060, HI980 and OFS BF05635-02 ber type, the Connector Option is None.
** The tolerance of ber length is +/-0.1m. 1 meter is standard. The lead time for special ber length will be longer.
Coupling Ratio
P Grade A Grade
IL
1
(dB) WDL
2
(dB) PDL
3
(dB) IL
1
(dB) WDL
2
(dB) PDL
3
(dB)
Signal Tap Signal Tap Signal Tap Signal Tap Signal Tap Signal Tap
99/1 ≤0.20 18.5-21.0 ≤0.10 ≤1.00 ≤0.05 ≤0.12 ≤0.25 15.5-21.5 ≤0.15 ≤1.20 ≤0.07 ≤0.15
98/2 ≤0.27 15.7-18.9 ≤0.15 ≤1.00 ≤0.05 ≤0.12 ≤0.32 14.8-19.8 ≤0.20 ≤1.15 ≤0.07 ≤0.15
97/3 ≤0.33 13.9-16.9 ≤0.17 ≤1.00 ≤0.05 ≤0.12 ≤0.37 13.2-17.7 ≤0.22 ≤1.15 ≤0.07 ≤0.15
95/5 ≤0.38 11.4-14.8 ≤0.20 ≤0.90 ≤0.05 ≤0.12 ≤0.50 11.2-15.2 ≤0.25 ≤1.10 ≤0.07 ≤0.15
90/10 ≤0.60 9.20-11.3 ≤0.25 ≤0.70 ≤0.07 ≤0.12 ≤0.70 8.70-11.7 ≤0.35 ≤0.75 ≤0.10 ≤0.15
85/15 ≤1.00 7.40-9.00 ≤0.25 ≤0.65 ≤0.10 ≤0.12 ≤1.20 7.00-9.60 ≤0.35 ≤0.75 ≤0.10 ≤0.15
80/20 ≤1.30 5.70-7.90 ≤0.25 ≤0.60 ≤0.10 ≤0.12 ≤1.50 5.40-8.50 ≤0.35 ≤0.75 ≤0.10 ≤0.15
75/25 ≤1.65 5.10-6.80 ≤0.30 ≤0.55 ≤0.10 ≤0.10 ≤1.85 4.80-7.30 ≤0.40 ≤0.70 ≤0.10 ≤0.15
70/30 ≤1.90 4.30-6.00 ≤0.35 ≤0.50 ≤0.10 ≤0.10 ≤2.20 4.20-6.40 ≤0.45 ≤0.65 ≤0.10 ≤0.15
65/35 ≤2.10 3.75-5.35 ≤0.35 ≤0.45 ≤0.10 ≤0.10 ≤2.40 3.50-5.60 ≤0.45 ≤0.60 ≤0.10 ≤0.15
60/40 ≤2.60 3.40-4.70 ≤0.35 ≤0.40 ≤0.10 ≤0.10 ≤2.80 3.20-4.70 ≤0.45 ≤0.55 ≤0.10 ≤0.15
55/45 ≤2.90 2.85-4.10 ≤0.35 ≤0.35 ≤0.10 ≤0.10 ≤2.95 3.05-4.25 ≤0.45 ≤0.50 ≤0.10 ≤0.15
50/50 2.70-3.40 ≤0.30 ≤0.10 2.60-3.60 ≤0.45 ≤0.15
1. Insertion loss over operating wavelength range at ~23°C (excluding PDL and TDL).
2. Insertion loss change over the specied wavelength range.
3. Insertion loss change over the all input polarization states.

Freelance Electronics
13197 Sandoval Street
Santa Fe Springs, CA 90670

Hours of Operation
Monday-Friday 7:30am-4:30pm PST
(Deadline for next day shipment 2:00pm PST)

Trustworthy Standards Serving the Electronic Components
Industry since 1986

Government Cage code#-1V4R6
Duns Number# 788130532
Certified Small Disadvantaged Business