Features

• Industry-standard Architecture

– Low-cost, Easy-to-use Software Tools

• High-speed, Electrically Erasable Programmable Logic Devices

– 5 ns Maximum Pin-to-pin Delay

• CMOS- and TTL-compatible Inputs and Outputs

– Latch Feature Holds Inputs to Previous Logic States

• Pin-controlled Standby Power (10 µA Typical)

• Advanced Flash Technology

– Reprogrammable

– 100% Tested

• High-reliability CMOS Process

– 20-year Data Retention

– 100 Erase/Write Cycles

– 2,000V ESD Protection

– 200 mA Latch-up Immunity

• Dual Inline and Surface Mount Packages in Standard Pinouts

• PCI-compliant

• True Input Transition Detection “Z” and “QZ” Version

High-

performance

EE PLD

ATF22V10C

ATF22V10CQ

See separate datasheet

for ATF22V10CZ and

ATF22V10CQZ options.

Rev. 0735P–PLD–01/02

TSSOP

CLK/IN

IN/PD

GND

VCC

I/O

Pin Configurations

All Pinouts Top View

Pin Name Function

CLK Clock

IN Logic Inputs

I/O Bi-directional Buffers

GND Ground

VCC +5V Supply

PD Power-down

DIP/SOIC

CLK/IN

IN/PD

GND

VCC

I/O

PLCC

Note: For all PLCCs (except “-5”), pins 1, 8, 15 and 22 can be

left unconnected. However, if they are connected, supe-

rior performance will be achieved.

IN/PD

GND*

I/O

GND*

I/O

GND

GND*

I/O

CLK/IN

VCC*

VCC

I/O

ATF22V10C(Q)

0735P–PLD–01/02

Logic Diagram

Description

The ATF22V10C is a high-performance CMOS (electrically erasable) programmable

logic device (PLD) that utilizes Atmel’s proven electrically erasable Flash memory tech-

nology. Speeds down to 5 ns and power dissipation as low as 100 µA are offered. All

speed ranges are specified over the full 5V ± 10% range for industrial temperature

ranges, and 5V ± 5% for commercial temperature ranges.

Several low-power options allow selection of the best solution for various types of

power-limited applications. Each of these options significantly reduces total system

power and enhances system reliability.

Absolute Maximum Ratings*

Temperature under Bias .................................. -40°Cto+85°C

*NOTICE: Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Note: 1. Minimum voltage is -0.6V DC, which may under-

shoot to -2.0V for pulses of less than 20 ns.

Maximum output pin voltage is V

+ 0.75V DC,

which may overshoot to 7.0V for pulses of less

than 20 ns.

Storage Temperature ..................................... -65°Cto+150°C

Voltage on Any Pin with

Respect to Ground .........................................-2.0V to +7.0V

(1)

Voltage on Input Pins

with Respect to Ground

during Programming .....................................-2.0V to +14.0V

(1)

Programming Voltage with

Respect to Ground .......................................-2.0V to +14.0V

(1)

DC and AC Operating Conditions

Commercial Industrial

Operating Temperature (Ambient) 0°C-70°C-40°C-85°C

Power Supply 5V ±5% 5V ± 10%

ATF22V10C(Q)

0735P–PLD–01/02

Note: 1. These device types will create a JEDEC file which when programmed in ATF22V10C devices will enable the power-down

mode feature. All other device types have the feature disabled.

Note: 1. Not more than one output at a time should be shorted. Duration of short circuit test should not exceed 30 sec.

Compiler Mode Selection

PAL Mode

(5828 Fuses)

GAL Mode

(5892 Fuses)

Power-down Mode

(1)

(5893 Fuses)

Synario ATF22V10C (DIP)

ATF22V10C (PLCC)

ATTF22V10C DIP (UES)

ATF22C10C PLCC (UES)

ATF22V10C DIP (PWD)

ATF22V10C PLCC (PWD)

WINCUPL P22V10

P22V10LCC

G22V10

G22V10LCC

G22V10CP

G22V10CPLCC

DC Characteristics

Symbol Parameter Condition Min Typ Max Units

Input or I/O Low

Leakage Current

0 ≤ V

≤ V

(Max) -35.0 -10.0 µA

Input or I/O High

Leakage Current

3.5 ≤ V

≤ V

10.0 µA

Power Supply Current,

Standby

=Max,

Outputs Open

C-5, 7, 10 Com. 85.0 130.0 mA

C-10 Ind. 90.0 140.0 mA

C-15 Com. 65.0 90.0 mA

C-15 Ind. 65.0 115.0 mA

CQ-15 Com. 35.0 55.0 mA

CQ-15 Ind. 35.0 70.0 mA

CC2

Clocked Power Supply

Current

= Max, Outputs Open,

f=15MHz

C-5, 7, 10 Com. 150.0 mA

C-10 Ind. 160.0 mA

C-15 Com. 70.0 90.0 mA

C-15 Ind. 70.0 90.0 mA

CQ-15 Com. 40.0 60.0 mA

CQ-15 Ind. 40.0 80.0 mA

Power Supply Current,

PD Mode

= Max Com. 10.0 100.0 µA

= 0, Max Ind. 10.0 100.0 µA

(1)

Output Short Circuit

Current

OUT

= 0.5V -130.0 mA

Input Low Voltage -0.5 0.8 V

Input High Voltage 2.0 V

+0.75 V

Output Low Voltage

or V

=Min

=16mA

Com.,

Ind.

0.5 V

=12mA Mil. 0.5 V

Output High Voltage

or V

=Min

=-4.0mA 2.4 V

Part #	ATF22V10CQ-15JI
Description	IC PLD 10MC 15NS 28PLCC
Category	IC
Availability	In Stock
Qty	34

Qty	Price
1 - 7	$5.29370
8 - 14	$4.21090
15 - 21	$3.97028
22 - 28	$3.68955
29 +	$3.28851

Manufacturer	Available	Qty
Atmel Date Code: 0647	Freelance Stock: 31 Ships Immediately
Atmel Date Code: 0431	Freelance Stock: 3 Ships Immediately

ATF22V10CQ-15JI

Related Items

Technical Document