Freelance Electronics Components Distributor
Closed Dec 25th-26th
800-300-1968
We Stock Hard to Find Parts

AT32AP7002-CTUR

Part # AT32AP7002-CTUR
Description IC MCU 32BIT ROMLESS 196CBGA
Category IC
Availability In Stock
Qty 37
Qty Price
1 - 3 $39.30392
4 - 9 $31.26449
10 - 18 $29.47794
19 - 28 $27.39364
29 + $24.41607
Manufacturer Available Qty
Atmel
Date Code: 0705
  • Shipping Freelance Stock: 37
    Ships Immediately



Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

13
32054AS-AVR32-02/07
AT32AP7002
Serial Peripheral Interface - SPI0, SPI1
MISO Master In Slave Out I/O
MOSI Master Out Slave In I/O
NPCS0 - NPCS3 SPI Peripheral Chip Select I/O Low
SCK Clock Output
Synchronous Serial Controller - SSC0, SSC1, SSC2
RX_CLOCK SSC Receive Clock I/O
RX_DATA SSC Receive Data Input
RX_FRAME_SYNC SSC Receive Frame Sync I/O
TX_CLOCK SSC Transmit Clock I/O
TX_DATA SSC Transmit Data Output
TX_FRAME_SYNC SSC Transmit Frame Sync I/O
DMA Controller - DMAC
DMARQ0 - DMARQ3 DMA Requests Input
Timer/Counter - TIMER0, TIMER1
A0 Channel 0 Line A I/O
A1 Channel 1 Line A I/O
A2 Channel 2 Line A I/O
B0 Channel 0 Line B I/O
B1 Channel 1 Line B I/O
B2 Channel 2 Line B I/O
CLK0 Channel 0 External Clock Input Input
CLK1 Channel 1 External Clock Input Input
CLK2 Channel 2 External Clock Input Input
Two-wire Interface - TWI
SCL Serial Clock I/O
SDA Serial Data I/O
Universal Synchronous Asynchronous Receiver Transmitter - USART0, USART1, USART2, USART3
Table 3-1. Signal Description List
Signal Name Function Type
Active
Level Comments
14
32054AS-AVR32-02/07
AT32AP7002
CLK Clock I/O
CTS Clear To Send Input
RTS Request To Send Output
RXD Receive Data Input
TXD Transmit Data Output
Pulse Width Modulator - PWM
PWM0 - PWM3 PWM Output Pins Output
Universal Serial Bus Device - USB
DDM USB Device Port Data - Analog
DDP USB Device Port Data + Analog
VBG USB bandgap Analog
Connected to a 6810 Ohm ± 0.5%
resistor to gound and a 10 pF
capacitor to ground.
Table 3-1. Signal Description List
Signal Name Function Type
Active
Level Comments
15
32054AS–AVR32–02/07
AT32AP7002
4. Power Considerations
4.1 Power Supplies
The AT32AP7002 has several types of power supply pins:
VDDCORE pins: Power the core, memories, and peripherals. Voltage is 1.8V nominal.
VDDIO pins: Power I/O lines. Voltage is 3.3V nominal.
VDDPLL pin: Powers the PLL. Voltage is 1.8V nominal.
VDDUSB pin: Powers the USB. Voltage is 1.8V nominal.
VDDOSC pin: Powers the oscillators. Voltage is 1.8V nominal.
The ground pins GND are common to VDDCORE and VDDIO. The ground pin for VDDPLL is
GNDPLL, and the GND pin for VDDOSC is GNDOSC.
See ”Electrical Characteristics” on page 928 for power consumption on the various supply pins.
4.2 Power Supply Connections
Special considerations should be made when connecting the power and ground pins on a PCB.
Figure 4-1 shows how this should be done.
Figure 4-1. Connecting analog power supplies
AVDDUSB
AVDDPLL
AVDDOSC
AGNDUSB
AGNDPLL
AGNDOSC
VDDCORE
VCC_1V8
3.3uH
C54
0.10u
C55
0.10u
C56
0.10u
PREVIOUS1234567891011NEXT