UC1842/3/4/5

UC2842/3/4/5

UC3842/3/4/5

Current Mode PWM Controller

FEATURES

•

Optimized For Off-line And DC

To DC Converters

•

Low Start Up Current (<1mA)

•

Automatic Feed Forward

Compensation

•

Pulse-by-pulse Current Limiting

•

Enhanced Load Response

Characteristics

•

Under-voltage Lockout With

Hysteresis

•

Double Pulse Suppression

•

High Current Totem Pole

Output

• Internally Trimmed Bandgap

Reference

• 500khz Operation

• Low R

O Error Amp

DESCRIPTION

The UC1842/3/4/5 family of control ICs provides the necessary features to

implement off-line or DC to DC fixed frequency current mode control schemes

with a minimal external parts count. Internally implemented circuits include

under-voltage lockout featuring start up current less than 1mA, a precision

reference trimmed for accuracy at the error amp input, logic to insure latched

operation, a PWM comparator which also provides current limit control, and a

totem pole output stage designed to source or sink high peak current. The

output stage, suitable for driving N Channel MOSFETs, is low in the off state.

Differences between members of this family are the under-voltage lockout

thresholds and maximum duty cycle ranges. The UC1842 and UC1844 have

UVLO thresholds of 16V (on) and 10V (off), ideally suited to off-line

applications. The corresponding thresholds for the UC1843 and UC1845 are

8.4V and 7.6V. The UC1842 and UC1843 can operate to duty cycles

approaching 100%. A range of zero to 50% is obtained by the UC1844 and

UC1845 by the addition of an internal toggle flip flop which blanks the output

off every other clock cycle.

BLOCK DIAGRAM

A/B

Note 1: A = DIL-8 Pin Number. B = SO-14 and CFP-14 Pin Number.

Note 2: Toggle flip flop used only in 1844 and 1845.

SLUS223A - APRIL 1997 - REVISED MAY 2002

UC1842/3/4/5

UC2842/3/4/5

UC3842/3/4/5

ABSOLUTE MAXIMUM RATINGS(Note 1)

Supply Voltage (Low Impedance Source) ..............30V

Supply Voltage (I

CC < 30mA) .................Self Limiting

Output Current...................................

Output Energy (Capacitive Load) ....................5µJ

Analog Inputs (Pins 2, 3)...................-0.3V to +6.3V

Error Amp Output Sink Current ....................10mA

Power Dissipation at T

A ≤ 25°C (DIL−8).................1W

Power Dissipation at T

A ≤ 25°C (SOIC-14) .........725mW

Storage Temperature Range..............-65°C to +150°C

Junction Temperature Range .............-55°C to +150°C

Lead Temperature (soldering, 10 seconds)...........300°C

Note 1: All voltages are with respect to Pin 5.

All currents are positive into the specified terminal.

Consult Packaging Section of Databook for thermal

limitations and considerations of packages.

CONNECTION DIAGRAMS

DIL-8, SOIC-8 (TOP VIEW)

N or J Package, D8 Package

PLCC-20 (TOP VIEW)

Q Package

SOIC-14, CFP-14. (TOP VIEW)

D or W Package

PACKAGE PIN FUNCTION

FUNCTION PIN

N/C

COMP

N/C 3

N/C 4

VFB 5

N/C 6

ISENSE 7

N/C 8

N/C 9

RT/CT 10

N/C 11

PWR GND 12

GROUND 13

N/C 14

OUTPUT 15

N/C 16

VC 17

VCC 18

N/C 19

VREF 20

Package TA ≤ 25°C

Power Rating

Derating Factor

Above TA ≤ 25°C

TA ≤ 70°C

Power Rating

TA ≤ 85°C

Power Rating

TA ≤ 125°C

Power Rating

W 700 mW 5.5 mW/°C 452 mW 370 mW 150 mW

DISSIPATION RATING TABLE

PARAMETER TEST CONDITIONS

UC1842/3/4/5

UC2842/3/4/5

UC3842/3/4/5 UNITS

MIN TYP MAX MIN TYP MAX

Reference Section

Output Voltage T

J = 25°C, IO = 1mA 4.95 5.00 5.05 4.90 5.00 5.10 V

Line Regulation 12

≤

25V 6 20 6 20 mV

Load Regulation 1

≤

20mA 6 25 6 25 mV

Temp. Stability (Note 2) (Note 7) 0.2 0.4 0.2 0.4 mV/°C

Total Output Variation Line, Load, Temp. (Note 2) 4.9 5.1 4.82 5.18 V

Output Noise Voltage 10Hz

≤

10kHz, T

J = 25°C (Note2) 50 50

Long Term Stability T

A = 125°C, 1000Hrs. (Note 2) 5 25 5 25 mV

Output Short Circuit -30 -100 -180 -30 -100 -180 mA

Oscillator Section

Initial Accuracy T

J = 25°C (Note 6) 47 52 57 47 52 57 kHz

Voltage Stability 12

≤

25V 0.2 1 0.2 1 %

Temp. Stability T

MIN

≤

MAX (Note 2) 5 5 %

Amplitude V

PIN 4 peak to peak (Note 2) 1.7 1.7 V

Error Amp Section

Input Voltage V

PIN 1 = 2.5V 2.45 2.50 2.55 2.42 2.50 2.58 V

Input Bias Current -0.3 -1 -0.3 -2

VOL 2

≤

4V 65 90 65 90 dB

Unity Gain Bandwidth (Note 2) T

J = 25°C 0.7 1 0.7 1 MHz

PSRR 12

≤

25V 60 70 60 70 dB

Output Sink Current V

PIN 2 = 2.7V, VPIN 1 = 1.1V 2 6 2 6 mA

Output Source Current V

PIN 2 = 2.3V, VPIN 1 = 5V -0.5 -0.8 -0.5 -0.8 mA

OUT High VPIN 2 = 2.3V, RL = 15k to ground 5 6 5 6 V

OUT Low VPIN 2 = 2.7V, RL = 15k to Pin 8 0.7 1.1 0.7 1.1 V

Current Sense Section

Gain (Notes 3 and 4) 2.85 3 3.15 2.85 3 3.15 V/V

Maximum Input Signal V

PIN 1 = 5V (Note 3) 0.9 1 1.1 0.9 1 1.1 V

PSRR 12

≤

25V (Note 3) (Note 2) 70 70 dB

Input Bias Current -2 -10 -2 -10

Delay to Output V

PIN 3 = 0 to 2V (Note 2) 150 300 150 300 ns

UC1842/3/4/5

UC2842/3/4/5

UC3842/3/4/5

ELECTRICAL CHARACTERISTICS:

Unless otherwise stated, these specifications apply for -55°C

≤

125°C for the

UC184X; -40°C

≤

85°C for the UC284X; 0°C

≤

70°C for the 384X; V

CC = 15V

(Note 5); R

T = 10k; CT = 3.3nF, TA=TJ.

Note 2: These parameters, although guaranteed, are not 100% tested in production.

Note 3: Parameter measured at trip point of latch with V

PIN 2 =0.

Note 4: Gain defined as

VPIN

VPIN V=≤≤

∆

0308,.

Note 5: Adjust V

CC above the start threshold before setting at 15V.

Note 6: Output frequency equals oscillator frequency for the UC1842 and UC1843.

Output frequency is one half oscillator frequency for the UC1844 and UC1845.

Note 7: Temperature stability, sometimes referred to as average temperature coefficient, is described by the equation:

Temp Stability

V max VREF min

TJ max TJ min

REF

−

() ()

REF (max) and VREF (min) are the maximum and minimum reference voltages measured over the appropriate

temperature range. Note that the extremes in voltage do not necessarily occur at the extremes in temperature.

Part #	8670401PA
Description
Category	IC
Availability	Out of Stock
Qty	0

8670401PA

Related Items

Technical Document