
1N4001 THRU 1N4007
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
l
Low forward voltage drop
l
High current capability
l
High reliability
l
High surge current capability
l
Exceeds environmental standards of MIL-S-19500/228
Case: Molded plastic , DO-41
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 75 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375"(9.5mm) Lead Length at
T
A
=75
¢J
1.0 A
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method)
30 A
Maximum Forward Voltage at 1.0A DC and
25
¢J
1.1 V
Maximum Full Load Reverse Current Full
Cycle Average at 75
¢J
Ambient
30 £g
A
Maximum Reverse Current at T
A
=25 ¢J
At Rated DC Blocking Voltage T
A
=100
¢J
5.0
500
£g A
£g
A
Typical Junction capacitance (Note 1) 15
F
Typical Thermal Resistance (Note 2) R £KJA 50 ¢J/W
Typical Thermal resistance (NOTE 2) R
£K
JL
25 ¢J
/W
Operating and Storage Temperature Range
T
,T
-55 to +150 ¢J
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B
mounted.