GENERAL DATA
Life Expectancy Minimum operations
Mechanical 1 x 10
8
at 3Hz
Electrical 1 x 10
5
at 0.5 A, 125 VAC, Res.
1 x 10
5
at 2.0 A, 30 VDC, Res.
Operate Time 4 ms at nominal coil voltage
(max)
Release Time (max) 4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength See table
(at sea level)
Dropout Greater than 10% of nominal coil voltage
Insulation Resistance 10
9
ohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 115°C (239°F)
Vibration Operational, 3.3 mm DA, 10–55 Hz
Non-destructive, 5.5 mm DA, 10–55 Hz
Shock Operational, 75 g min., 11 ms
Non-destructive, 100 g min., 11 ms
Max. Solder Temp. 260°C (500°F) for 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 2 grams
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
CONTACTS
Arrangement DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings Resistive load:
Max. switched power: 60 W or 62.5 VA
Max. switched current: 2.0 A
Max. switched voltage: 220 VDC or 250 VAC
Rated Load
UL/CUR 0.5 A at 125 VAC general use
2.0 A at 30 VDC
Material Silver nickel, gold plated
Resistance < 50 milliohms initially at 6 V, 1 A
COIL (Polarized)
Power
At Pickup Voltage 79 mW (3–24 VDC)
(typical) 152 mW (48 VDC)
Max. Continuous
Dissipation 0.32 W at 20°C (68°F)
Temperature Rise At 30° C (54°F) nominal coil voltage
Temperature Max. 115°C (239°F)
AZ
4/16/09W
AZ8462
MICROMINIATURE
POLARIZED RELAY
FEATURES
• SMT and DIP mounting available
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• High dielectric and surge voltage:
2.5 KV surge (per Bellcore TA–NWT–001089)
1.5 KV surge (per FCC Part 68)
1,000 Vrms, open contacts
• Monostable and bistable (latching) versions available
• Low power consumption: 79 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed for automatic wave soldering and cleaning
• UL, CUR file E43203
• All plastics meet UL94 V–0, 30 min. oxygen index
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
