Application

Tooling

Manual Arbor Frame (with slide)

Part Number 1583518-1*

Upper Tooling

Part Number 1583514-1*

Fixture, Discrete Wire, Closed End

Part Number 1583515-1 (28-26 AWG)

Part Number 1583515-2 (30-28 AWG)

Fixture, Discrete Wire, Feed-Thru

Part Number 1583516-1 (28-26 AWG)

Part Number 1583516-2 (30-28 AWG)

Fixture, Ribbon Cable, Closed End or

Feed-Thru

Part Number 1583517-1

*Required, plus appropriate Fixture(s).

One-At-A-Time Termination Tooling Part Numbers

Note: Max. Insulation Outside Diameter Wire:

.060 [1.52] for MTA-100 Connectors /.095 [2.41] for MTA-156 Connectors

MTA-100 and MTA-156 Mass Termination Tooling Part Numbers

Note: Max. Insulation Outside Diameter Wire:

.050 [1.27] for MTA-100 Connectors /.070 [1.78] for MTA-156 Connectors

Harness Board Holding Fixture

Interchangeable Head

MTA Connector

Interchangeable Head

Used With

and Tape Feed Track

Assembly

Part Number Used With

Part Number

Applicator Tooling

Part Number Used With

Assembly Assembly

Closed End ——

58242-1 —

854175-1 &

312522-1

58242-3 58575-1

854200-1 (Base)

Feed Thru

58644-1 (Discrete Wire)

†

58074-1 (Man Hd Tl)

58243-1 —

——

MTA-100 58644-2 (Notched Cable)

†

58243-3 58575-1

Connector

Closed End

——

58635-1 58575-1

——

(Posted)

Feed Thru

——

58636-1 58575-1

——

(Posted)

Closed End ——

58244-1 —

854176-1 &

312522-1

58244-3 58576-1

854200-1 (Base)

Feed Thru

58646-1 (Discrete Wire)

††

58074-1 (Man Hd Tl)

58245-1 —

——

MTA-156

58646-2 (Notched Cable)

††

58245-3 58576-1

Connector Card Edge ——

59848-1 —

——

59848-3 58576-1

Closed End

——

58009-1

—

——

(Posted)

58009-2 58576-1

Feed Thru

——58010-2 58576-1 ——

(Posted)

Manual Bench

Closed End ——

58244-1 —

Tool 58024-1 ——

58244-3 58576-1

and Tooling

MTA-156

Assy 58040-1

Quad

58245-1 —

58024-1 and

Feed Thru —— Tooling Assy ——

58245-3 58576-1

58040-1

†

2- through 12-positions.

††

2- through 8-positions.

Manual Bench

Tool 58024-1

and Tooling

Assembly

58039-1

Manual Bench

Tool 58024-1

and Tooling

Assembly

58040-1

Interchangeable Head and Interchangeable Head and

Interchangeable Head

Loose-Piece Feed Track Tape Feed Track

T-Handle

✔

MTA Connector

Manual Hand Tool 58074-1

Air Bench Mount Air Bench Mount

Special

Maintenance

Assembly

Air Hand Tool 58075-1

Tool 58338-1 Tool 58338-1

Applicator

Tool

Air Bench Mount Tool 58338-1

Electric Bench Electric Bench

Electric Bench Machine 931800-1

Machine 931800-1 Machine 931800-1

MTA-50

Closed End

1583503-1 ————

Feed Thru

Closed

58246-1 (Standard)*n

853546-1 & 853542-1

End

58246-2 (Ext Wear)* 933567-1 466728-1 59803-1

MTA-100 58246-3 (Ribbon Cable)

(Base)

Connector

Feed Thru 58442-1 ———59803-1

Posted

58638-1 ———59803-1

(Closed-End)

Closed

58247-1 (Standard)**

853547-1 & 853542-1

End

58247-2 (Ext Wear) 933568-1 466727-1 59804-1

MTA-156 58247-3 (Ribbon Cable)

(Base)

Connector

Feed Thru 58443-1 ———59804-1

Posted

58082-1 ———59804-1

(Closed-End)

MTA-156 Closed

58061-1 ——567020-1 59839-1

Card-Edge End

MTA-156 Closed

58392-1 ———59804-1

Quad End

*Repair Kit 856600-1 **Repair Kit 856600-2

Notes:

1. A repair kit consists of a cam,

a feed-slide sub-assembly

and a locating pawl.

Repair kits can be made

available for other inter-

changeable heads. Consult

Tyco Electronics.

2. Standard modular heads

58246-1 and 58247-1 are

recommended for low

volume use.

3. Extended wear modular

heads 58246-2 and 58247-2

are recommended for high

volume use.

4. T-Handle Maintenance Tools

are for maintenance (field)

use only. They are not rec-

ommended for production.

5. Some Manual Hand Tool

Assemblies are available:

a. Order 58579-1, comprised

of Head 58246-1 with

Manual Hand Tool 58074-1.

b. Order 58580-1, comprised

of Head 58247-1 with

Manual Hand Tool 58074-1.

c. Order 58639-1, comprised

of Head 58638-1 with

Manual Hand Tool 58074-1.

MTA-50 Mass Termination Tooling Part Numbers

MTA Application Tooling Options

MTA, CST-100 II, SL-156 and

AMP Economy Power (EP) Connectors

Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

Interchangeable Head

■ Terminates one

unstripped wire per cycle

■ Aligns and holds the

connector in place for

each termination

■ Automatically advances

the connector after each

termination

Interchangeable Head and

Loose-Piece Feed Track

■ No special setup required

■ Connectors are easily

loaded into feed track

■ Connectors are fed using

a simple spring-loaded

pusher

Interchangeable Head and

Tape Feed Track

■ No special setup required

■ Tape-mounted connectors

are transferred from prod-

uct reel to feed track by

simply pulling on the free

end of the carrier tape

■ Connectors are fed using

a simple spring-loaded

pusher

Special Applicator

■ Connectors are easily

hand loaded into feed

track

■ Automatically advances

the connector after each

termination

■ Cannot be cycled until

the connector is properly

positioned

Manual Hand Tool with

Interchangeable Head

Air Bench Mount Tool with

Interchangeable Head and

Foot Switch

Air Hand Tool with

Interchangeable Head

Electric Bench Machine with

Interchangeable Head

One-At-A-Time Termination

Tooling (Typical Tooling

Combinations)

Air Bench Mount Tool with

Interchangeable Head and Loose-Piece Feed Track

Electric Bench Machine with

Interchangeable Head and

Tape Feed Track

AMP-O-LECTRIC Bench

Machine with Special Applicator

Power Units

Manual Hand Tool —

Pistol Grip Handle

Part No. 58074-1

■ Easy to use

■ Ratchet control will not

release the trigger until it

is fully bottomed

■ Head may be rotated for

user convenience

Air Hand Tool —

Pistol Grip Pneumatic Handle

Part No. 58075-1

■ Light weight

■ Operates at air pressure

between 40 and 70 psi

[2.76 and 4.83 bar]

■ Head may be rotated for

user convenience

Air Bench Mount Tool —

Bench Mount Power Assembly

Part No. 58338-1

■ May be mounted with

interchangeable head

pointed up or down

■ Operated by a foot

switch

■ Operates at air pressure

between 40 and 70 psi

[2.76 and 4.83 bar]

Electric Bench Machine —

IDC Power Unit

Part No. 931800-1

■ All electric: 120 VAC,

60 Hz, 2 A

■ Compact, portable and

quiet

■ Operated by a foot

switch

T-Handle Maintenance Tool

Interchangeable Heads and Applicators (Refer to page 76 for part numbers.)

Application

Tooling

MTA Application Tooling Options (Continued)

MTA, CST-100 II, SL-156 and

AMP Economy Power (EP) Connectors

Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

Application

Tooling

Applicator and Holding Fixture

■ Wires are laced into

plastic combs for mass

termination

■ Trims excess wire for

closed-end terminations

■ Holding fixture may be

mounted to a harness

board

Applicator and Tape Feed Track

■ Tape-mounted connectors

are transferred from prod-

uct reel to feed track by

simply pulling on the free

end of the carrier tape

■ Connectors are fed using

a simple spring-loaded

pusher

■ Feed stop easily adjusted

for different connector

sizes

■ Notch cable with up to

28 conductors for .100

centerline, and 24

conductors for .156

centerline

■ Pressure plate holds

cable in position during

notching

■ Scrap conveniently

removed through a chute

with a blast of air from a

built-in air valve

Mass Termination Tooling

(Typical Tooling

Combinations)

Manual Bench Tool with

Applicator and Holding Fixture

Manual Bench Tool with Applicator and Tape Feed Track

Air Bench MachineAir Harness Tool with

Applicator

Ribbon Cable Notcher

Assembly

2700 lb Air Bench Machine with

Ribbon Cable Notcher Assembly

Power Units

Manual Bench Tool —

Arbor Frame Assembly

Part No. 58024-1

■ Applicator and holding

fixture can be oriented for

operator convenience for

closed-end or feed-thru

terminations

■ Ram height (insertion

depth) is easily adjusted

■ May be bench mounted

Air Harness Tools —

Hand-Held Power Unit

with Applicator

Part No. 58575-1 (MTA-100)

Part No. 58576-1 (MTA-156)

■ Applicator can be rotated

360° for orientation with

holding fixture

■ Insertion depth is easily

adjusted

■ Operates at air pressure

between 75 and 95 psi

[5.17 and 6.55 bar]

Air Bench Machine —

Pneumatic Unit

Part No. 91112-2

■ Operated by a foot

switch

■ Operates at air pressure

between 80 and 90 psi

[5.52 and 6.21 bar]

■ Not recommended for

notching cable with more

than 14 conductors

2700 lb Air Bench Machine —

Part No. 312522-1

■ Operated by a foot

switch

■ Capable of exerting

2,700 lb [12,000 N] of

force at minimum 80 psi

[5.52 bar] air pressure

■ May be bench mounted

Applicators and Notcher Assemblies

Ribbon Cable Notcher Assembly

Part Number

Wire Size

Centerline Used With

AWG

854449-2 26-28

.100 Manual Bench Tool

2.54 58024-1

854449-4 22-28

.100 Air Bench Machine

2.54 91112-2

2700 lb Bench Machine

.156

312522-1

854449-3 18-24

3.96

AMP-O-LECTRIC

Bench Machine 1-471273-3

(with Conversion Kit 690675-2)

Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC

Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb

Air Bench Machine.

MTA Application Tooling Options (Continued)

MTA, CST-100 II, SL-156 and

AMP Economy Power (EP) Connectors

Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341

Part #	3-640440-7
Description	CONN IDC CONN F 7 POS 2.54MMIDT RA CBL MNT - Bulk
Category	CONNECTOR
Availability	Out of Stock
Qty	0

3-640440-7

Related Items

Technical Document