69
www.vectorelect.com
800-423-5659
Connectors
Specifications
Solder Type Insulator Material: Phenolic, UL-94V-0 or glass filled Diallylphthalate UL-94V-1
or Ryton R10 or equivalent
Wire-Wrap Type Insulator: Phenolic, UL-94V-0 or glass filled Diallylphthalate UL-94V-1
or Polyester (VALOX) or equivalent
UL-94V-0.
Contact Material: Phosphor bronze QQ-B-750
Contact Plating: .000010” gold over .000050” nickel
Test Voltage: 650 VAC
Rated Current: 3 AMPS
Contact Res. Drop: 30 mV Max. @ rated current
Insulation Resistance: 5000 megohms nominal @ 500 VDC
Operating Temperature: -65 to +105 degrees C
PCB Accessories
Style 1
• Wire-Wrap .025” Sq. Posts
• Allows 3 level wraps
• Center Mount
• Use 28 to 32 AWG wire
• STD bus
This section contains parts and accessories for Vectorbord products. They are useful for board-level
prototyping and breadboarding. Prototypes are created in various ways; by computer design or by hand
- but with one thing in common: sooner or later, you have to make a physical board. It is at this stage
that Vectorbord and these parts and accessories may be useful to you. They are selected for conven-
ience and utility and they are readily available from your Vector distributors.
(Dimension table next page)
Centermount
R600 Edge Connectors
R636-1
R644-3C
R644-3F
R656-2
R680-1
