2525
Contact Style Description Plating Specification Order Code
*
Crimp Contact 0.25µM Gold All Over (Standard) 60 8017 0313 00 339
Loose 0.25µM Gold Nose & Tail (Optional) 60 8017 0313 00 042
Crimp Contact End Carrier 0.25µM Gold All Over (Standard) 60 8017 0323 99 339
(1800 Contacts per reel) 0.25µM Gold Nose & Tail (Optional) 60 8017 0323 99 042
0.25µM Gold All Over (Standard) 60 8017 0323 00 339**
0.25µM Gold Nose & Tail (Optional) 60 8017 0323 00 042**
Tail Section – 2.49 x 0.61 (0.098 x 0.024)
Solder Tag Contact 0.25µM Gold All Over (Standard) 60 8017 0513 00 339
*
Tail Section – 1.27 x 0.63 (0.025 x 0.005)
14.4mm Maxiwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0613 00 339
Tail Section – 1.27 x 0.63 (0.025 x 0.005)
19.3mm Maxiwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0623 00 339
Tail Section – 0.635 x 0.63 (0.025 x 0.005)
14.0 Miniwrap Contact 0.25µM Gold All Over (Standard) 60 8017 0633 00 339
Tail Section – 0.635 x 0.63 (0.025 x 0.005)
4.3mm PC Solder Contact
0.25µM Gold All Over (Standard) 60 8017 0663 00 339
* for ø 1.00 mm P.T.H.
Varilok
®
Loose Contacts
* Indicates standard contact
** Order code to be used when purchasing through a USA source.
Plating code 343 = 0.50 µm Gold all over
Varilok
®
connectors can be specified as either fully loaded, to
include the connector body and a variety of pre-loaded
contact termination types or the empty body and a selection
of separately specified and ordered contacts. The table
below details the various loose contacts available.
P
Type of Connector Half
Plug = P
Socket = R
G
Location Side
(Large Dia.)
Guide Pin = G
Guide Socket = S
1
Positions
1 through 6
G
Location Side
(Small Dia.)
Guide Pin = G
Guide Socket = S
1
Positions
1 through 6
ORDERING CODE
Varicon
®
8016 Series connectors are designed with an integral
polarizing system to ensure in high density environments that the
correct halves are mated together.
As a factory standard, male plugs are set to the code PG1G1, with
the female receptacles being set to the opposite matching code
RS1S1.
Customers who need to change the standard polarization to
another position can do so by using hand tool 06 1989 02 00
0000, or, by ordering the connectors with the required polarization
(eg: PG1G4 or RS2S5, etc) When ordering a different polarization
from normal, the polarization is called out at the end of the part
number (Ex: 00 8016 056 000 601PG2G4, etc).
CONNECTOR POLARIZATION
Ordered separately
Ordered separately
If fitted type 217
If fitted type 218
If fitted type 750
If fitted type 296
If fitted type 504
