D15
1mm Pitch FPC/FFC Connector
FH 21 Series
■Features
1. LIF (Low Insertion Force) Mechanism
LIF mechanism secures mounting serviceability.
2. Kink Mechanism
DIP post is treated with kinks, and prevent connector
floating in the soldering process.
3. Contact Structure on Both Sides
The contact structure on both sides does restrict
directionality of FPC and FFC conductors.
■Applications
HDD, facsimiles, printers, and crystal liquie modules, etc.
■Product Specifications
Rating
Rated Current: 0.5A
Operating Temperature Range: -30 ~
+
70ç (Note 1)
Storage Temperature Range: -10 ~
+
50ç (Note 2)
Rated Voltage: 50V AC
Operating Humidity Range: Relative humidity 90% max.
Storage Humidity Range: Relative Humidity: 90% max.
(Not dewed) (Not dewed)
Applicable FPC
t=0.3±0.05 Solder plating
Note 1. Temperature rise included when energized
Note 2. This storage indicates a long-term storage state for the unused product before the board mounted.
Note 2. The operating temperature and humidity ranges are applied to the non-energized state after the connector has been
installed in the board.
Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".
Item Specification Condition
1. Insulation Resistance 500Mø min. Measured at 100V DC
2. Withstand voltage Neither short nor breakdown should occur 150V AC for 1 minute
3. Contact Resistance
40mø
Measured at 100mA
*FPC conductor resistance included
4.
Mechanical
Operation
Contact resistance: 40mø max. 10 cycles
No part should be damaged, cracked, or loosened
Electrical discontinuity, 1µS max. Frequency 10~55Hz and single amplitude 0.75mm in
5. Vibration Contact resistance: 40mø 3 directions for 2 hours, respectively.
No part should be damaged, cracked, or loosened
Electrical discontinuity, 1µS max.
Acceleration: 490m/s, duration: 11ms, sine half-wave
6. Shock Contact resistance: 40mø max.
in 3 directions for 3 cycles, respectively
No part should be damaged, cracked, or loosened
7.
Moisture Resistance
Contact resistance: 40mø max.
Exposed to temperature 60ç and humidity 90~95%
7.
in Steady State
Insulation resistance: 50M
ø
max.
for 96 hours
No part should be damaged, cracked, or loosened
