8-62 Electrical Interconnect Products
Coaxial Cable Termination
RF one-step BNC/TNC connectors
(cont’d.)
Part selection process
1. From Product Options and Dimensions on page 8-61, select the connector style you need
(BNC or TNC, plug or jack, male or female contacts).
2. From the tables that follow, find the appropriate table for the connector style you selected.
3. From the appropriate table, select the connector part number based on the RG cable type or Raychem cable part number.
For cable types not shown use the cable dimensions.
Note: The cable dimensions in each table are keyed to the diagram below.
Product characteristics
Material
Center contact Gold-plated beryllium copper (female)
Gold-plated brass (male)
Dielectric insulator PTFE
Transition Silver-plated brass
Connector body Nickel-plated brass
Solder and flux Sn63Pb37, RMA flux
Braided shield Tin-plated copper wire per ASTM B3
Insulation sleeve Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride, transparent blue
Strain relief/sealing sleeve Radiation-crosslinked, heat-shrinkable modified polyolefin with adhesive, black
Typical performance
Dielectric withstand voltage 1500 V
Insulation resistance 5000 megohms
Temperature rating -55C to 150C
Contact resistance-straight Inner = 1.5 milliohms, outer = 1.0 milliohm
Contact resistance-right angle Inner = 2.5 milliohms, outer = 1.5 milliohms
Cable retention force 295N (66 lb) to 822N (196 lb)
Voltage rating 500 V RMS
Connector durability 500 mating cycles minimum
Electrical performance
Nominal impedance 50 and 75 ohms
Frequency range Up to 2.8 GHz
Solder Transition CenterJ
contact
DielectricJ
insulator
ConnectorJ
body
Insulation sleeveJ
and solder
Shield
Insulation J
sleeve
8-Electric. Interc. Products 30/9/02 11:09 am Page 62