Amphenol Connex 122122

Cross Number:

Item Description: TNC STRT CRMP JCK RG58-50--TF- Bag

Qty Price
1 + $0.84000






Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

TNC COAXIAL CONNECTORS
TNC COAXIAL CONNECTORS
95
The Connex TNC connectors are made to a high quality level. Medium size coaxial
connectors with thread coupling. 50 ohm impedance for applications up to 11 GHz and
75 ohm impedance up to 1 GHz. Cable entires full crimp or clamp type with soldered or
crimp center contact.
75 OHM SERIES
Within the internationally standardized TNC mating face dimensions, a perfect 75 ohm
characteristic impedance cannot be realized. However, at frequencies up to 1 GHz, the
small impedance deviation is negligible for practical applications. A typical SWR of 1.15:1
at 1 GHz is achieved.
All 75 ohm TNC connectors and 50 ohm TNC connectors are intermateable.
Note: Silverplated bodies are available by adding “S” to end of part number. Nexcote (white
bronze) plating with no nickel under body or center contact is available by adding
“NEX” to end of part number.
Impedance 50 ohm 75 ohm
Frequency Range 0–11 GHz 0–1 GHz
Working Voltage 500 Volts rms. 500 Volts rms.
Dielectric Withstanding Voltage 1500 Volts rms. 1500 Volts rms.
VSWR 1.3 max. 0–11 GHz 1.05 + 0.1f (GHz) DC to 1 GHz
Contact Resistance Center contact 1.5 milliohm Center contact 1.5 milliohm
Outer contact 0.2 milliohm Outer contact 0.2 milliohm
Insulation Resistance 5000 megohms (min) 5000 megohms (min)
PARTS NAME MATERIAL FINISH
Center Male Brass Gold or Silver plated
Contact Female Phosphor Bronze (nominal) or Gold or Silver plated
Beryllium Copper
Metal parts Brass Nickel*
Insulators Teflon, Delrin, PBT polyester None
Clamp gaskets Silicone rubber, Synthetic rubber None
Crimp ferrule Annealed copper Nickel*
ELECTRICAL SPECIFICATIONS
MATERIAL SPECIFICATIONS
TNC.4 11/27/01 4:55 PM Page 95
TNC COAXIAL CONNECTORS
TNC COAXIAL CONNECTORS
96
INTERFACE MATING DIMENSIONS
NOTE 1: I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED
WITH 1.32/1.37 MM DIA. PIN.
Letter Millimeters [Inches}
Minimum Maximum
A 9.60 [.378] 9.70 [.382]
B 8.79 [.346] 9.04 [.356]
C 8.31 [.327] 8.46 [.333]
D 8.10 [.319] 8.15 [.321]
E 4.72 [.186]
F 1.73 [.068] 2.24 [.088]
G 8.31 [.327] 8.51 [.335]
H 4.75 [.187]
J 4.72 [.186] 5.23 [.206]
K 0.15 [.006]
L 4.95 [.195]
M 2.06 [.081] 2.21 [.087]
N 6.50 [.256]
P 4.78 [.188] 5.28 [.208]
R 10.52 [.414]
S 0.38 [.015] 0.76 [.030]
Letter Millimeters [Inches}
Minimum Maximum
A 11.18 [.440]
B
FLARED TO MEET GOOD
ELECTRICAL CONTACT
C 4.83 [.190]
D 1.32 [.052] 1.37 [.054]
E 5.33 [.210] 5.84 [.230]
F 0.15 [.006] 0.46 [.018]
G 5.28 [.208] 5.79 [.228]
H 0.08 [.003] 1.02 [.040]
J 2.06 [.081] 2.21 [.087]
K 1.98 [.078]
M 1.98 [.078]
N 1.60 [.063]
P 3.96 [.156]
Q 0.64 [.025]
PLUG
JACK
TNC.4 11/27/01 4:55 PM Page 96
122100 01 Nickel Delrin 50 E
122103 03 Nickel Delrin 75 E
122104 02 Nickel Delrin 50 E
122107 04 Nickel Delrin 75 E
Remark: Only for solid center conductor cable
Cable Crimp
P.N. Group Finish Insulation Impedance Tool
STRAIGHT CRIMP PLUG — SINGLE CRIMP
TNC COAXIAL CONNECTORS
PLUG CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE
122108 01 Nickel Delrin 50 A
122372 01A Nickel Delrin 50 A
122410 01B Nickel Delrin 50 A
122110 03 Nickel Delrin 50 A
122111 03 Nickel Delrin 75 A
122426 03A Nickel Delrin 75 A
122394 07 Nickel Teflon 50 D
122398 07A Nickel Teflon 50 D
122408 07B Nickel Delrin 50 A
122393 07C Nickel Teflon 50 L
122470 07F Nickel Teflon 75 D
122390 08 Nickel Delrin 75 E
122465 08A Nickel Teflon 75 A/H
122391 15 Nickel Delrin 75 E
122417 17 Nickel Teflon 50 .610 HEX
122951* 18 Nickel Teflon 75 A
122950* 19 Nickel Teflon 75 B
122471 Nickel Teflon 50 N/A
TIMES LMR300
*Center contact .053" diameter, 30µ" Au.
True 75 ohm. Use .044 hex or 12-indent crimp
Cable Crimp
P.N. Group Finish Insulation Impedance Tool
STRAIGHT CRIMP PLUG STANDARD CABLE
97
TNC COAXIAL CONNECTORS
All connector bodies, unless otherwise
noted, are nickel plated. Center contacts
are 3µ" gold plated. Insulators are Delrin,
unless otherwise noted.
Silver plating and Teflon insulators are
available on virtually all TNC connectors.
Please contact Connex for samples and
quotes.
All dimensions in millimeters and [inches].
For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.
For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.
For Crimp Tool information, see page 183.
01 58/ 58A/ 58C/ 141/ 303/
LMR195
/ B7806A
01A 55/ 142/ 223/ 400
01B LMR200
/ B7807A
02 58 PLENUM/THINNET/
122U/ B88240/ B89907
03 59/ 62/ 140/ 210
03A 59/ U-20AWG
04 59/ U PLENUM
04A 59/ U PLENUM-20AWG
05 174/ 188A/ 316/ B7805A
05A 316/ U DOUBLE BRAIDED
06 179/ 187/ B9221
06A 179/ U DOUBLE BRAIDED
07 8/ 8A/ 213/ 393
07A 214
07B 8X/ LMR240
/ B7808A
07C B9913/ LMR400
/
B7810A/ B8214
07D B89913
07E 11
07F 11/ U-14AWG/ B8213/
B9292/ B7731/ B1859A
08 6/ 143/ 212
08A B1694A/ B9248
08B 6 PLENUM/ B1695A
09 B8227/ 89207
10 .141 SEMI-RIGID/ 402/U
11 .085 SEMI-RIGID/ 405/U
12 .250 SEMI-RIGID
13 .047 SEMI-RIGID/ B1674A
14 178/ 196
15 B8281/ B9231/ B9141
15A B88281
16 180/ 195/ 122/ B8218/
B1865A/ B1855
17 LMR6OO
18 AT&T734A/ B1505A
19 AT&T735A/ B735A1
CABLE GROUP LEGEND
TNC.4 11/27/01 4:55 PM Page 97
1234567NEXT

Freelance Electronics
13197 Sandoval Street
Santa Fe Springs, CA 90670

Hours of Operation
Monday-Friday 7:30am-4:30pm PST
(Deadline for next day shipment 2:00pm PST)

Trustworthy Standards Serving the Electronic Components
Industry since 1986

Government Cage code#-1V4R6
Duns Number# 788130532
Certified Small Disadvantaged Business