Freelance Electronics Components Distributor
Closed Dec 25th-26th
800-300-1968
We Stock Hard to Find Parts

78-100-1

Part # 78-100-1
Description
Category CIRCUIT BREAKER
Availability Out of Stock
Qty 0
Qty Price
1 + $5.19503



Technical Document


DISCLAIMER: The information provided herein is solely for informational purposes. Customers must be aware of the suitability of this product for their application, and consider that variable factors such as Manufacturer, Product Category, Date Codes, Pictures and Descriptions may differ from available inventory.

Key Features:
Effi ciency to 96%
1A Output Current
Compact SIP Case
LM78xx Replacement
Wide Input Range
Short Circuit Protected
Thermal Shutdown
Low Noise
Low Low Cost
SR7810
Low Cost, 1A Output
Non-isolated POL
Switching Regulators
Output
Parameter Conditions Min. Typ. Max. Units
Output Voltage Accuracy ±2.0 ±3.0 %
Line Regulation Vin = Min to Max ±0.2 ±0.4 %
Load Regulation Iout = 10% to 100% ±0.4 ±0.6 %
Ripple & Noise (20 MHz) 25 35 mV P - P
Thermal Shutdown See Note 2 150 °C
Quiescent Current See Note 3 5 8 mA
Temperature Coeffi cient 0.02 %/°C
Maximum Capacitive Load 1,000 µF
Output Current Limit See Note 4 2,000 mA
Short Circuit Input Power 0.5 1.8 W
Output Short Circuit Continuous (Autorecovery)
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Not Isolated
Switching Frequency 280 330 450 kHz
Environmental
Parameter Conditions Min. Typ. Max. Units
Operating Temperature Range Ambient -40 +25 +85 °C
Operating Temperature Range Case +100 °C
Storage Temperature Range -55 +125 °C
Lead Temperature 1.5 mm From Case For 10 Sec 300 °C
Cooling Free Air Convection
Humidity RH, Non-condensing 95 %
Physical
Case Size 0.45 x 0.35 x 0.69 Inches (11.5 x 9.0 x 17.50 mm)
Case Material Non-Conductive Black Plastic (UL-94V0)
Weight 0.13 Oz (3.7g)
Reliability Specifi cations
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 2.0 MHours
Series
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Electrical Specifi cations
Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
www.micropowerdirect.com
Typical Application Circuit
Notes:
1. C1 is a low ESR ceramic capacitor used to minimize noise at the regulator.
A tantalum or low ESR electrolytic capacitor may also be used.
2. C1 & C2 are required and should be mounted as close to the regulator pins as possible.
Component Values
Model
Number
Capacitors
C1
F/V)
C2
F/V)
SR7810-015W 10 /50 22 / 6.3
SR7810-018W 10 /50 22 / 6.3
SR7810-02W 10 /50 22 / 6.3
SR7810-03W 10 /50 22 / 6.3
SR7810-05W 10 /50 22 / 16
SR7810-06W 10 /50 10 / 16
SR7810-09W 10 /50 10 / 16
SR7810-12W 10 /50 10 / 25
SR7810-15W 10 /50 10 / 25
Notes:
1. Load regulation is specifi ed for an output load change of 10% to 100%.
2. Measured at an internal IC junction.
3. Quiescent current is specifi ed at 0% load for Vin = min to max.
4. The output current limit on models with outputs between 1.5V and 3.3V is 3A.
5. This regulator is not designed to be used in parallel with another unit to increase output power.
6. The input should not exceed the range given in the model selection chart. Exceeding this limit could
damage the unit.
For right-angle pin option, add suffi x “L” to model number (i.e. SR7810-15WL)
Model Selection Guide
Model
Number
Input
Voltage Range
(VDC)
Output
Effi ciency
(%, Typ)
Voltage
(VDC)
Current
(mA, Max)
Min Vin Max Vin
SR7810-015W(L) 4.75 - 26.0 1.5 1,000.0 80 71
SR7810-018W(L) 4.75 - 26.0 1.8 1,000.0 83 74
SR7810-02W(L) 4.75 - 28.0 2.5 1,000.0 88 80
SR7810-03W(L) 4.75 - 28.0 3.3 1,000.0 90 83
SR7810-05W(L) 6.50 - 32.0 5.0 1,000.0 93 88
SR7810-06W(L) 9.00 - 32.0 6.5 1,000.0 94 90
SR7810-09W(L) 12.0 - 32.0 9.0 1,000.0 95 92
SR7810-12W(L) 16.0 - 32.0 12.0 1,000.0 96 94
SR7810-15W(L) 20.0 - 32.0 15.0 1,000.0 97 94
Mechanical Dimensions
Pin 1 2 3
Function +Vin Gnd +Vout
Pin Connection
Derating Curve
Characteristic Curves
(Effi ciency & Ripple)
Effi ciency vs Input Voltage (Full Load) Ripple vs Input Voltage (Full Load)
Effi ciency vs Load (Vin = Min)
Ripple vs Load (Vin = Min)
Effi ciency vs Load (Vin = Max)
Ripple vs Load (Vin = 24V)
www.micropowerdirect.com
MicroPower Direct
We Power Your Success - For Less!
292 Page Street Ste D Stoughton, MA 02072 TEL: (781) 344-8226 FAX: (781) 344-8481 E-Mail: sales@micropowerdirect.com
Notes:
All dimensions are typical in inches (mm)
Tolerance x.xx = ±0.01 (±0.25)
Pin 1 is marked by a “dot” or indentation on the side of the unit